Recommendations for quality control switches

[ianmgull]

Looking for the standard switches. Turn signals, hi/low beam, horn, kill, (no e-ignition).

A lot of the universal stuff has a cheap plasticy vibe. Looking for something a little more slick looking. Any ideas?

 

[danker16]

http://www.ruckuslife.com/review/product/list/id/129/category/9/ thi is what im getting
http://www.shop.theruckshop.com/ELECTRICAL_c19.htm

 

[nrcb125]

If you're willing to try wiring it on your own, the controls from any bike will work. I've got the controls from a Chinese dirt bike I found in a dumpster on my 500 right now and they work great.

 

[ianmgull]

Yeah I'm definitely willing to do that. I'm doing all my wiring from scratch so that's the plan anyway. Looking for either aluminum or steel housed buttons and switches.

 

[coyote13]

Posh.

 

[Tim]

OEM switches are fine - I run a YHA205 switch on my left side which is an old Yamaha switch (not easy to find, looking for a 2nd right now myself). It has headlight/hi-low, horn, kill and turn signals all on one neat pod. Only thing I have on the right side is my throttle and brake.

 

[Ellwood]

I got these and they are metal and nice... About $100 for the pair.. but very solid.
http://cognitomoto.com/collections/electronics
Don't scroll down too far or you're going to start drooling over the motogadget stuff.

 

[ianmgull]

Damn. That's some nice gear.