halftide45
New Member
Hi everyone!
I've purchased a (poorly) cafed cb750. All the pieces are there, though ugly, and it just needs to be cleaned up a little to run (or so I believe). I just finished derusting the inside of the tank. I bought new air, fuel, and oil filters, and new fuel lines. My problem is that I can't seem to figure out how to route the fuel lines. I have done a fair amount of maintenance on outboard engines and lawnmowers but I can't even find the input for the carbs! Embarrassing. If anyone could provide a picture that would be amazing. It's a DOHC, not positive on the year because its different than the frame (listed as a 1979 on the reg.). The engine number is as follows: RC01E-2214074.
Thanks for any responses!
I've purchased a (poorly) cafed cb750. All the pieces are there, though ugly, and it just needs to be cleaned up a little to run (or so I believe). I just finished derusting the inside of the tank. I bought new air, fuel, and oil filters, and new fuel lines. My problem is that I can't seem to figure out how to route the fuel lines. I have done a fair amount of maintenance on outboard engines and lawnmowers but I can't even find the input for the carbs! Embarrassing. If anyone could provide a picture that would be amazing. It's a DOHC, not positive on the year because its different than the frame (listed as a 1979 on the reg.). The engine number is as follows: RC01E-2214074.
Thanks for any responses!