Rustnrubbish find.

toglhot

Active Member
I found this rusted hulk a few years ago and over three years transformed it. Lots and lots of mods: VM carbs, extended manifolds, PMA cog by nversion, single points conversion, spin on filter, oil cooler, plus custom seat, tail light, headlight bracxkets, harnesses, risers, exhaust pipes, mufflers, engine mounts, battery box, side panels, too many mods to remember.
The bike started life as 74 TX650: 70 psi compression, damaged crankcase, shifter drum bearing ground away,, badly pitted valves, undersize pistons, oversized bore, gunked up carbs, badly oxidised and rusted. Over three years I tuned it into what you see in the last two pics.
 

Attachments

  • 1 (1).jpg
    1 (1).jpg
    339.5 KB · Views: 31
  • 1.jpg
    1.jpg
    88.1 KB · Views: 31
  • 3.jpg
    3.jpg
    38.8 KB · Views: 27
  • 4.jpg
    4.jpg
    518.7 KB · Views: 28
  • 5.jpg
    5.jpg
    906.4 KB · Views: 30
  • 6.jpg
    6.jpg
    46.8 KB · Views: 28
  • 8.jpg
    8.jpg
    622.5 KB · Views: 27
  • 9.jpg
    9.jpg
    600.1 KB · Views: 37
  • 348591104_3489338568051581_4603482796766752218_n.jpg
    348591104_3489338568051581_4603482796766752218_n.jpg
    801.7 KB · Views: 33
  • 348708152_623853176325522_5993486692105057991_n.jpg
    348708152_623853176325522_5993486692105057991_n.jpg
    1,009.3 KB · Views: 37
Back
Top Bottom