barreto
New Member
I've been making and selling these hoops for a while now and a friend suggested listing them on forums as well. They are made from 1" x 0.065" ERW mild steel, bent with a 3.25" Centerline Radius Die so they end up at 7.5" OD.
I have a lot of people asking for other sizes but right now I have two options- The 7.5" OD or making a hoop with two 90 degree pieces to any width with a flat spot between them, welded and ground smooth. The legs are roughly 17" and can be lengthened or shortened on request.
Here's the eBay listing http://www.ebay.com/itm/190990483367?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
Email or PM me for details or questions.
Cheers
I have a lot of people asking for other sizes but right now I have two options- The 7.5" OD or making a hoop with two 90 degree pieces to any width with a flat spot between them, welded and ground smooth. The legs are roughly 17" and can be lengthened or shortened on request.
Here's the eBay listing http://www.ebay.com/itm/190990483367?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
Email or PM me for details or questions.
Cheers