quadracer351
Coast to Coast
Nope calipers where left on mm for all measurements. The.045mm was how thick the actual gasket is. Unfortunately works been non stop and I need to do a double tonight so I won't have till the 26 to get back to the motor and do the grease testteazer said:Plugs in that motor are long reach ie 3/4" but some plugs have projecting electrodes that protrude into the chamber. What the photos appear to show is a clear interference on one cylinder and a less dramatic one on the other.
In theory the interference would be the same both sides of the chamber on all 4 heads but the bores are probably not concentric.
I assume that your "mm" measurements are really Inches. ie 64mm bore in barrel and .045" gasket with 66mm bore.
Sent from my SM-G935V using Tapatalk