We used to make the slim line Norton frame as it is the best for a triton build. However the slim line has a reputation of "not all are created equal." Put two original slim lines side by side, and start measuring certain parts and the chances are the two will not be exactly the same.
This caused us so much grief from some customers, that we decided "sod it" and just did the Wide line/Manx, which do not vary.
But that did not stop potential customers asking for the slim line. So we have relented under pressure to produce them again. Designed to work with "Unity Equipe" engine plates.
Choice of either standard type swing arm, or our box section. 7 7/8" between the blades to take Norton hubs or 8 1/8" between blades to accept Tri t140 hubs. Both types of box section arm will accept a 130mm tyre.
This caused us so much grief from some customers, that we decided "sod it" and just did the Wide line/Manx, which do not vary.
But that did not stop potential customers asking for the slim line. So we have relented under pressure to produce them again. Designed to work with "Unity Equipe" engine plates.
Choice of either standard type swing arm, or our box section. 7 7/8" between the blades to take Norton hubs or 8 1/8" between blades to accept Tri t140 hubs. Both types of box section arm will accept a 130mm tyre.
