Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
I scooped up a 1980 (or 81?) Kawi KZ650 off of CL two years ago. The PO labeled it as a bobber and I bought it with the potential that it had to become a bobber. However I LUCKILY never got around to hardtailing it. I started going to towards the cafe look, then recently decided on the happy medium of a bratstyle.
I rode it for a summer with it only being "good enough" on pretty much a bench synch. After that I started having more problems and my #3 cyl went dead...
Anyways, short story long, here's what i started with. I made a few adjustments recently just to get a feel for what to do.
It had Renthal Motorcross handlebars from PO. I flipped them upside down to cop a feel.
Well, lets see what I can do to make this a decent lil daily driver...
I have a question I've been dying to ask on the ton: Should I honestly keep the stock air box or dump it? Performance is more important than looks and I've heard that the wind/rain can wreak havoc on pod air filters. I love the look however. I just want to know I can pass a semi without the engine running lean from the wind... any input?
I have a Kawasaki Zephyr 550 and I was considering putting on pod filters as well. I also love the look of the pod filters! While I've never done it, I have been warned by many people to not do it... Apparently, it just become a carb jetting nightmare that if set up right, is great. But, if set up wrong, is a PITA.
It'll of course run better with the airbox. Tuning will be tougher with pods for sure, and you'll likely never get it 100%. If you don't like the look of the airbox, but don't want the hassle of pods, velocity stacks are your next best option. Carbs really benefit from the smooth airflow stacks provide (the airbox has stacks built into it).
alright.
I need to get this thing on the road asap. it's sunny and 70 degrees here in Nor Cal. laid on a couple coats of paint, lowered it about 1 1/2 inches. I can still use the current handlebars... I'll eventually get clip ons and lower it another 1 1/2 inches... I found some sweet stitched leather at a flea market for $15/yd. I didn't even need the 1/2yd I bought. I made the seat with that and some left over siding material I got at home depot for 51 cents, I cut up a sleeping bag pad like so many builders do on other threads and then I dissected the couch in the background for the batting. I need to sync my carbs, get a new battery, clean up the wiring and install the brake light, get a new rear view, and get some new rubber. Since ya'll want an after pic, here is a good idea. I'm not 100% doen with the paint, I'm going to paint a white pinstripe where the copper and black meet, then clear coat it...
I got rid of the copper seat lip. It was the inspiration for the paint though...
Normally I tell people to run the airbox if they are running stock carbs, however......
99% stock carbs on street bikes are CV style which use vacuum differential to operate the slides and hate hate HATE pod filters. In your case though, the stock carbs are mechanical and you should be able to run bods AND tune for them as well.
It's just CV carbs that have a problem with pods....
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.