AgentX
Over 1,000 Posts
OK, just checking myself here...
This tach adapter is meant to adapt a tach for a stock Harley to an aftermarket single-fire ignition. My assumption is therefore, that it doubles the signal input fed into it.
https://baronscustom.com/catalog/display/243/index.html
I currently have a tach which needs 2 pulses per rev (4-cyl car tach) but my bike (single-cyl wasted-spark) only gives 1 pulse per rev, showing half the actual engine revs.
Would this adapter work to make my tach read properly? (Guessing both coil leads go to my single coil, for my application...) Thanks!
This tach adapter is meant to adapt a tach for a stock Harley to an aftermarket single-fire ignition. My assumption is therefore, that it doubles the signal input fed into it.
https://baronscustom.com/catalog/display/243/index.html
I currently have a tach which needs 2 pulses per rev (4-cyl car tach) but my bike (single-cyl wasted-spark) only gives 1 pulse per rev, showing half the actual engine revs.
Would this adapter work to make my tach read properly? (Guessing both coil leads go to my single coil, for my application...) Thanks!