Georgelogue
New Member
Does anyone have insight on this?
I cleaned my tank (rust remover, then the 3 step process of lining the tank with northern radiators tank lining kit) I then removed the paint from the outside of the tank, sanded it down to the finish i wanted and went and got it clear powder coated. The powder coating guys expressed concern with the interior lining and the tank going into the curing oven. As there was not much i could do at this point, because i wanted the powder coating done before the outside of the tank started to rust, i told them to go ahead with it. I wasnt happy with the finish of the clear powder coat so i had them do it again with an aluminum color instead. So the tank was cured twice; the inside seems textured now, but its not flaking off. Do i need to re-line the tank? if so does anyone have experience removing tank liner?
Thanks!
I cleaned my tank (rust remover, then the 3 step process of lining the tank with northern radiators tank lining kit) I then removed the paint from the outside of the tank, sanded it down to the finish i wanted and went and got it clear powder coated. The powder coating guys expressed concern with the interior lining and the tank going into the curing oven. As there was not much i could do at this point, because i wanted the powder coating done before the outside of the tank started to rust, i told them to go ahead with it. I wasnt happy with the finish of the clear powder coat so i had them do it again with an aluminum color instead. So the tank was cured twice; the inside seems textured now, but its not flaking off. Do i need to re-line the tank? if so does anyone have experience removing tank liner?
Thanks!