CALfeRacer said:Sounds like I need to get the VIN verified for Vermont plates, so I might just suck it up, take a sick day, and go to the DMV to get CA plates.
You shouldn't have to, the VIN verification is only for 350cc+ bikes.
CALfeRacer said:Sounds like I need to get the VIN verified for Vermont plates, so I might just suck it up, take a sick day, and go to the DMV to get CA plates.
advCo said:You shouldn't have to, the VIN verification is only for 350cc+ bikes.
CALfeRacer said:That's what I thought, but I feel like I remember seeing somewhere that they changed it for out-of-staters. Worth a shot!
Thanks! The left side is definitely going to need a re-do, it cracked in a couple spots when I was heating/bending it. That line on the bottom is basically just where the battery ends and then straight up along the line of the frame, I do like the idea of rounding it off though.goldy said:Not so bad. Left side might look a little better with that bottom edge rounded instead of the sharp angle. The paint may have reacted with whatever is underneath...they would almost dissappear if painted black.