These are my under $45 rearsets

A hacksaw would be fine to cut rearsets; that's what I used. Make sure you buy a good blade because it makes all the difference in the world.

I have no idea if a hacksaw would work for seat hump. It might. A $20 angle grinder from Harbor Freight and some 1/16" cut-off wheels would work much better.

--Chris
 
Re: These are my under $45 rearsets With Plans

OK, so I finally scanned in my rearsets. I posted these on my website for entertainment use only. If you print the scan of the rearsets, I expect you do so for entertainment purposes only. This are my design and appropriate for my 1969 Honda CL350. You do not have my permission to manufacture these for resale.

Do not repost these plans or any website. Again, these are my plans; leave them on my website. If someone is interested, link to my website.

Whew! Sorry about everything above. When one has a family, one does his best to make sure they are protected.

http://www.fiaccone.com/CafeRacer/CafeAug07/RearSets.PDF

--Chris
 
WOW, what a coincidence, I have two aluminum plates in my car's trunk that are a perfect match for your rearsets plan.

IMG00142.jpg
 
Verrry nice!! I wish i were that handy haha! I found a place on the net that has rearsets for just about anything under the sun for around $300 Omar's dirt track racing if you all are interested. www.omarsdtr.com This is my first post and i love this place guys! Tons of ideas input and advice and some nice bikes! I'll be stickin around if you all dont mind...hehe
 
chrisf said:
Aluminum BMX pegs, a 1/4" chunk of 6061-T6 and 3/4" fully knurled tube. Total cost $30 or so
RearsetsDraft.jpg


The CAD plans and the rearsets cut.
Rearsets.jpg


The modified CB350 passenger location and the attached rearset with copper thrust bearing.
RearsetBackside.jpg


Another pic of the modified passenger location.
FullyWelded.jpg


Left side rearset finished.
LeftFootControl.jpg


Right side reaset. The motion ratio is screwed up on this one. I'll fix it this evening.
RightFootControl.jpg


--Cheers, Chris
Click to expand...

this topic is super old but chris if you still have the photos could you repost them please. 45 bucks for some rearsets cant beat that
 
Let me look around an see if I still have them. Even better: check out Herm's thread. He took what I did and made them even better. I recommend his solution.

--Thanks, Chris
 
i looked at herms thread unless it was the worng herm but i didn't see any rearset build. do you have a link to the thread your talking about?
 
thanks for the links the build is great. paul your set are nice also i have so many options and can't wait to get these set up.
 
You must log in or register to reply here.

DTT Light or Dark

  • DTT Light
    • www.jadusmotorcycleparts.com
    www.lostapostle.ca/
    www.sparckmoto.com

    Spread the Love

    Back
    Top Bottom