Bucky
New Member
I recently had bought a basket case project. Knowing that I would have some engine work. So started taking the top end off. And this is what I find.
That is the #1 exhaust and intake valves. #4 is not as bad. #2&3 look as they should. But inside the #1 cylinder I find this goop.
I was able to get the cylinders off, for the most part they look clean. Here is my question, hone cylinders, install new rings on pistons, and do a complete overhaul on the head? Or bore out to the first oversize, and completely rebuild the head.
Sent from my iPhone using DO THE TON
That is the #1 exhaust and intake valves. #4 is not as bad. #2&3 look as they should. But inside the #1 cylinder I find this goop.
I was able to get the cylinders off, for the most part they look clean. Here is my question, hone cylinders, install new rings on pistons, and do a complete overhaul on the head? Or bore out to the first oversize, and completely rebuild the head.
Sent from my iPhone using DO THE TON