Well, the bike is done, with the exception of getting the carbs spot on (ordered new O rings for carb inlets, and have to eliminate any and all air leaks....i.e. 115 main jets and still WAY lean.....falls flat at 5,000 RPM)....and I ordered some Progressive front fork springs, as the stockers are just to mushy.
2 teeth smaller on front sprocket....5,100 RPM @ 60 MPH. Strong acceleration! (until brick wall at 5,000 RPM) :-\
Oh....took it out...even though lean and rode the crap out of her! Got home...later pulled the dip stick and she is out of oil! She was good on oil before I left! I guess she dosen't like the extra heat from being run lean! :-\
Thanks for the support.
~Joe