Ts250 race rep

bradj

Active Member
DTT BOTM WINNER
The tank was full of crap after tring way to long to clean it I cut the tank apart and wire wheeled the inside. I also changed the fill neck
 

Attachments

MotorbikeBruno

New Member
Brad, How did you cut the tank "safely" (aka without blowing yourself up?) any good tricks for that? Tank looks killer.
 

bradj

Active Member
DTT BOTM WINNER
I washed it out witha ton of shit tring to get the rust out and I was hammered so I dint think about it to much
 

MotorbikeBruno

New Member
bradj said:
I washed it out witha ton of shit tring to get the rust out and I was hammered so I dint think about it to much
Noted. Drink beer, fill with shit, empty shit, cut tank = don't blow up. Got it. Can't wait to see this one finished. Very cool. 8)
 

bradj

Active Member
DTT BOTM WINNER
im sure there are things that will make it safe vinegar or something I'm not a scientist
 

datadavid

New Member
Cutting a tank with the lid off isn't very dangerous, even if its only been rinsed once. You might get a little whoof out of it!
Todays gas..
 

johnu

Active Member
DTT BOTM WINNER
Hey Brad, a very nice project which I will follow for sure. Your inspiration bike is similar to the first MX bike I had! The pic below is the same bike I had a 1975 RH 250 which was the bike between the TM250 and the RM250. I bought mine in 1980 and raced it but by then it was seriously outdated in the suspension department.

Do you intend to ride trail ride your bike?
 

Attachments

bradj

Active Member
DTT BOTM WINNER
Yea trail only, I just finished a 75 ts for my wife and s pw50 for my daughter. So the plan is for all of us to ride together in the spring

John that bike is rad as hell
 

DTT Sponsors

www.dimecitycycles.com
www.cognitomoto.com
https://www.townmoto.com/collections/vanson-leathers
www.speedmotoco.com
www.CITYLIMITMOTO.com
www.jadusmotorcycleparts.com
www.lostapostlejewelry.com
www.sparckmoto.com
Top Bottom