Turn signal switch...what are you guys using?

[Crim]

I've been searching the forum and internet for a small turn signal switch to use for my CB350F, but have come up empty handed. I was hoping you guys could help me out and let me know what you are all using?

Thanks!
Stephen

 

[finnerandr]

I too am looking for a small switch housing to use on the left bar that I could use for turn signal switch and horn button. Everything I have looked at so far has a headlight switch built in. Im not going to need a headlight switch on the bars, want to mount the light switch on the custom dash I am going to build. If worse comes to worse I will just use the stock housing, remove the light switch, JB Weld that hole shut, and repaint. But would love to have something other than the stock housing. Any suggestions?

 

[jeep28guy]

These are pretty cool and simple...

http://zero-eng.com/catalog/product_info.php/cPath/1_8/products_id/40

 

[dcwp]

I am using this one right now:

http://sterlingmotorworks.com/inc/sdetail/1702

I've also seen a version around with a horn button built in.

 

[Crim]

I am using this one right now:

http://sterlingmotorworks.com/inc/sdetail/1702

I've also seen a version around with a horn button built in.

Yeah I ran across that one.....unfortunately its out of stock

 

[dcwp]

They are available a few places on e-bay. That's where I found one with a horn button. I'll see if I still have the seller saved.

dp

EDIT: Here is the one I'm using http://cgi.ebay.com/ebaymotors/Triumph-BSA-Norton-2-3-way-Handle-bar-switch-clampon_W0QQitemZ270449010133QQcmdZViewItemQQptZMotorcycles_Parts_Accessories?hash=item3ef80465d5&_trksid=p3911.c0.m14

Should be some others around.