Viet
Been Around the Block
Hi everybody,
I has built-up the idea of cheap, adjustable and good quality rear set for a long time after fighting myself with a set of aluminum rear set. What I learn from my first rear set (bought one) are:
1. Its pulling lever is so short that only fit to rear disk brake not the traditional drum brake
2. the pulling angle (the angle between push lever and pulling lever) is fixed and so, when you change the bolt location, it is not create a good foot rest position. For some it has been said "adjustable", but the angle is adjusted for 45degree each position. This is too much for getting to best position.
3. It has 8mm bolts and that weak even for those who has just 120 lb like me. It is soon bended as we ride.
So I make my rear set that is :
1. Longer pulling lever
2. adjustable pulling angle with 20 position each only 18 degree
3. It has 10 mm bolt which supported with a 19.5mm steel sleeve. This sleeve reinforces the footrest against heavy weight pushed in the foot rest.
4. It is 6mm steel so it cheaper but very hard built for lasting that helps its price is only US$ 60/set
This is my rear set:
http://www.ebay.com.au/itm/Cafe-Racer-Rearset-/250955622526?pt=Motorcycles_Parts_Accessories&hash=item3a6e1ee87e
My price on ebay is $60 but for DoTheTon member, the price is US$55. Shipping to the US will be flat rate box and take about 2 weeks. The cost is $25 to $30. I only charge actual shipping cost. Return accepted within 7 days. Please email me for detail shipping cost at vietbac_pham@yahoo.com or if you have friends who is in Saigon, Vietnam, tell them to call in my shop at 165 Tran Nhan Ton, P2, Q10 for a cup of coffee, enjoy the classic and get the rear set directly.
IF YOU LOOKING FOR A COMPLETE SET WITH RODS AND CLEVISES LIKE THIS ONE:
PRICE FOR DOTHETON MEMBER IS $75 (SHIPPING TO EU IS $30 AND US IS $35)
This rear set is fit directly to rear foot peg of cb350, cb450 and cb175 (twin) with lot of room for the kickstarter
A completed rearset for CL350, 450 and 175 with rods and clevises is now at $70 (not including shipping to US and Canada is $35 and EU is exact $30) for DoTheTon members. But you shall buy out of ebay.
Hope you like this
Viet
I has built-up the idea of cheap, adjustable and good quality rear set for a long time after fighting myself with a set of aluminum rear set. What I learn from my first rear set (bought one) are:
1. Its pulling lever is so short that only fit to rear disk brake not the traditional drum brake
2. the pulling angle (the angle between push lever and pulling lever) is fixed and so, when you change the bolt location, it is not create a good foot rest position. For some it has been said "adjustable", but the angle is adjusted for 45degree each position. This is too much for getting to best position.
3. It has 8mm bolts and that weak even for those who has just 120 lb like me. It is soon bended as we ride.
So I make my rear set that is :
1. Longer pulling lever
2. adjustable pulling angle with 20 position each only 18 degree
3. It has 10 mm bolt which supported with a 19.5mm steel sleeve. This sleeve reinforces the footrest against heavy weight pushed in the foot rest.
4. It is 6mm steel so it cheaper but very hard built for lasting that helps its price is only US$ 60/set
This is my rear set:
http://www.ebay.com.au/itm/Cafe-Racer-Rearset-/250955622526?pt=Motorcycles_Parts_Accessories&hash=item3a6e1ee87e
My price on ebay is $60 but for DoTheTon member, the price is US$55. Shipping to the US will be flat rate box and take about 2 weeks. The cost is $25 to $30. I only charge actual shipping cost. Return accepted within 7 days. Please email me for detail shipping cost at vietbac_pham@yahoo.com or if you have friends who is in Saigon, Vietnam, tell them to call in my shop at 165 Tran Nhan Ton, P2, Q10 for a cup of coffee, enjoy the classic and get the rear set directly.
IF YOU LOOKING FOR A COMPLETE SET WITH RODS AND CLEVISES LIKE THIS ONE:
PRICE FOR DOTHETON MEMBER IS $75 (SHIPPING TO EU IS $30 AND US IS $35)
This rear set is fit directly to rear foot peg of cb350, cb450 and cb175 (twin) with lot of room for the kickstarter
A completed rearset for CL350, 450 and 175 with rods and clevises is now at $70 (not including shipping to US and Canada is $35 and EU is exact $30) for DoTheTon members. But you shall buy out of ebay.
Hope you like this
Viet