Victoria! Zeke's CB175 Build

[crazypj]

It was on the 500's in Britain.
I think fitting two on exhaust side would work OK
I don't think there is enough oil thrown there to pass through top end of it?
It would look cool as well, 'secret weapon' giving clearance for electronic valve actuation

 

[Texasstar]

It was on the 500's in Britain.
I think fitting two on exhaust side would work OK
I don't think there is enough oil thrown there to pass through top end of it?
It would look cool as well, 'secret weapon' giving clearance for electronic valve actuation

would we use an electronic valve to monitor crank case pressure? How clean is the oil that ends up in a typical catch can?


Sent from my iPhone using Tapatalk

 

[Texasstar]

Victoria is putting her makeup

on

Sent from my iPhone using Tapatalk

 

[xb33bsa]

would we use an electronic valve to monitor crank case pressure? How clean is the oil that ends up in a typical catch can?


Sent from my iPhone using Tapatalk

check swingarm bushes

 

[Texasstar]

check swingarm bushes

not that clean then


Sent from my iPhone using Tapatalk

 

[xb33bsa]

not that clean then


Sent from my iPhone using Tapatalk

nothing worse than a dirty bush

 

[Texasstar]

If this is really a Pop's Yoshimura replica is the design for the breather tube to be the catch can? Notice the routing of the pipe up above the left side of the frame and then back around to the right side?

Sent from my iPad using Tapatalk

 

[xb33bsa]

that is clear tubing

 

[xb33bsa]

the battery
hose volume = engine size

 

[Texasstar]

that is clear tubing

http://www.ttr400.com/photo3_2.html


Sent from my iPhone using Tapatalk

 

[Texasstar]

It was on the 500's in Britain.
I think fitting two on exhaust side would work OK
I don't think there is enough oil thrown there to pass through top end of it?
It would look cool as well, 'secret weapon' giving clearance for electronic valve actuation

dang 7 years ago http://forums.sohc4.net/index.php?topic=18370.0 I bet you have forgotten more than we have learned....

Sent from my iPad using Tapatalk

 

[Texasstar]

thanks Airtech


Sent from my iPhone using Tapatalk

 

[Texasstar]

we finished the swing arm bottom gusset plate and fab'd a new brake stay

Sent from my iPhone using Tapatalk

 

[Texasstar]

We are now H rated 2.50 x 18 k40race Heidenau

Sent from my iPhone using Tapatalk

 

[DesertLab]

Looks great. If you don't mind, where did you source the inserts for the holes you cut into the drum cover? Thanks!

 

[simo]

Looks great. If you don't mind, where did you source the inserts for the holes you cut into the drum cover? Thanks!

If you go back a couple of posts there a handy how to for DIY

 

[Texasstar]

Looks great. If you don't mind, where did you source the inserts for the holes you cut into the drum cover? Thanks!

handbuilt


Sent from my iPad using Tapatalk

 

[Texasstar]

Sent from my iPhone using Tapatalk

 

[1sttimer]

Sent from my iPhone using Tapatalk

Motobits going on?

 

[Texasstar]

it's a wrap for this shoot. No leaks in the tank!!!!! Thanks Junior the redkote worked great! Bike started on the 3rd try think she was adding a little drama for TV.


Sent from my iPhone using Tapatalk