HI all, with a sickness for two wheels. I have a 1974 CL360 and the P/O has cut and spliced in the wiring and unhooked all signals “what a mess”. Did I mention that I have no knowledge of electrical systems? I have a Clymer that dives me F-N crazy to boot. I just finished up the headlight with a H4 conversion, I got it working again but can’t figure out what the two green wires go to, the ones that are mounted to the bucket nuts and where they plug into; help there would be great! The bike has an aftermarket tail lamp with a three wire setup red, black & yellow that the P/O only hooked one of the three to the rear brake control so I have no tail light only brake lights when the key is in the run position, I do have a tail light when the key is in the acc position. I take it that I need power from the headlight to feed the tail light??? Any strait forward advice that’s helpful would be great.
I just want to get the bike through this riding season and maybe next summer when it is too damn hot here in hell to ride everyday, I will think about a rewire of the bike when it is tore down for a complete build.
Thanks in advance…
I just want to get the bike through this riding season and maybe next summer when it is too damn hot here in hell to ride everyday, I will think about a rewire of the bike when it is tore down for a complete build.
Thanks in advance…