Hi guys, i know this is on here about 1000 times and i have been sifting through the post but i need a few answers on the removal of wheel bearings front and back 1972 CB350.
I'm probably going to buy the retaining tool to remove the retainer from the rear wheel, but after i do that, do i use a blind bearing puller to get the bearings out? or drive them out etc.... ? are there any other retaining clips??
The shop manual doesnt offer much help, just says "remove bearings"
Any tutorials anywhere that show the actual steps, not finding much on youtube either. this is my second build but my first bike was a 350Four, so im running into some differences, plus i havent removed the bearings before even on that bike.. can ya help a brother out? thanks!
I'm probably going to buy the retaining tool to remove the retainer from the rear wheel, but after i do that, do i use a blind bearing puller to get the bearings out? or drive them out etc.... ? are there any other retaining clips??
The shop manual doesnt offer much help, just says "remove bearings"
Any tutorials anywhere that show the actual steps, not finding much on youtube either. this is my second build but my first bike was a 350Four, so im running into some differences, plus i havent removed the bearings before even on that bike.. can ya help a brother out? thanks!