Wiring harness for cl 350

[bigragu9]

Anybody now of any company's that make harness's for vintage Honda's/

 

[Rocan]

welcome to DTT...

no, not really. make one yourself; not too difficult to copy the original. hell, lots of places to improve the system/simplify it. if you really want OEM, i can sell you my CB350 harness in about three months time

 

[bigragu9]

What do you suggest as far as simplifying the system?

 

[Rocan]

depends what your doing. if your keeping all stock things (signals and starter etc) then you cant change much.

just look at the diagram and the stock harness and youll begin to see things that look redundant...

for example... if i remember correctly there are a couple of ground wires in places where you could simply run one that splits off...

 

[bigragu9]

Ya, small fire burned some of the harness, so I considered rewiring but might not be worth the trouble, I do want to keep it stock.
Thanks for your input.

 

[blucav85]

i have one i could sell you pm me if your intrested

 

[Rocan]

just go for the rewire... that way youll know that all your stuff is new and that shorts and breaks arent your culprit down the road. also youll understand how your bike is wired and youll be able to troubleshoot easily down the road. replace the stock bullet connectors... they are junk. use the plastic clip types with blades... that way youll have one clip to attach everything rather than multiple blade connectors.

 

[Gary]

I know Lossa Engineering claims to have built a custom wiring harness for some CB's from the ground up but they probable cost an arm and a leg easier to get a used one.