wiring up new speedo/tach, kz900

Bama704

Been Around the Block
I was able to get most of my lights wired up, but I can't get the neutral light to come on. I just want to confirm that I am looking at my wiring diagram correctly.

Looks like Positive (+) red/green
Negative (-) Brown

If so, that is how I have my new speedo wired up, and it's a no go...not sure what is going on. I have the red/green wired up to the green (+) and Brown wired to the green/black (-)

This is what I have wired up, along with the tach, http://www.dimecitycycles.com/2-5-inch-black-mini-speedometer-with-black-face-and-led-indicator-lights.html
 

Attachments

  • Z900-A4WiringDiagram.jpg
    Z900-A4WiringDiagram.jpg
    125.8 KB · Views: 323

Streetfighterkz

Been Around the Block
Brown is a live positive wire on the Kz. The neutral light comes on when the red/green goes to ground via the neutral switch by the shift drum.

Later, Doug
 

julian.allard66

Been Around the Block
As has been said brown is switched +12V on big Zs, neutral light has a feed from this on one side and a green wire that goes to the switch, most likely green wire is broken.
 

Bama704

Been Around the Block
Thanks for the replys! Brown is positive, I just had the wires switched around, now all wired up and all dummy lights work as they should.
 

DTT Bike Of The Month Gallery

DTT Light or Dark

www.jadusmotorcycleparts.com
shop.themotoworks.com
www.cognitomoto.com
https://www.townmoto.com
www.speedmotoco.com
www.lostapostle.ca/
www.sparckmoto.com
Top Bottom