WTB: CB750 Piston and sleeve & CB125 Crank (Big Bore for my CB100)

[loser]

You got to be joking :
If you need a step by step, it isn't for you
You machine top of piston and use as much stock stuff as possible.
It's the kind of thing I used to do because people said it wasn't possible

Wasn't expecting a step by step, just some prior advice or links for information. Sorry.

 

[coyote13]

Wasn't expecting a step by step, just some prior advice or links for information. Sorry.

Hop over to the main forum and introduce yourself and your projects first. Then you may ask your questions. Good day! ;D

 

[loser]

Hop over to the main forum and introduce yourself and your projects first. Then you may ask your questions. Good day! ;D

Any civilizations using energy will produce signature of waste detectable in mid-IR. "Any sufficiently advanced technology is indistinguishable from magic" Clarke's 3rd law. α=1E-7 (photovoltaic energy), ε=1E-4 (fossil fuels). γ=1E-4 ν=0 Twaste=300K, Earth has 0.01% excess mid-IR radiation because of humans. WISE taught us that the universe is not filled with alien civilizations capable of using energy of their galaxy (no K3). If K3 civilizations don't exist, logistically or physically impossible? Inevitably stop growing, inevitably short lived?

 

[whynot]

Running the risk of thread hi-jacking :

Where can you buy just the CB750 sleeve.?...I want to do this to my CB100 as well.

 

[surffly]

The Internet has cb750 sleves.
99% of the time new ones are sold by the set of four.
But used is much easier.....

 

[whynot]

The Internet has cb750 sleves.
99% of the time new ones are sold by the set of four.
But used is much easier.....

Kewl....thanks man.

 

[Dirty Dan]

I feel like I should just post the build thread for my 100 and document the process, but I sort of like watching you guys squirm (Kidding...sort of). You can find out everything you need to know about this setup on this site or after a quick google search... You have to do a little bit of the foot-work yourselves, Who likes handouts anyways?

It's all doable and pretty easy (If you/your machinist knows what's going on).

 

[loser]

I feel like I should just post the build thread for my 100 and document the process, but I sort of like watching you guys squirm (Kidding...sort of). You can find out everything you need to know about this setup on this site or after a quick google search... You have to do a little bit of the foot-work yourselves, Who likes handouts anyways?

It's all doable and pretty easy (If you/your machinist knows what's going on).

I'd be interested, obviously

 

[coyote13]

Yeah man, let's see it. I guarantee there would be a whole lot more 100's getting bored out if you did!