Jramos13
Been Around the Block
Hi guys!!
Im working on a tx/xs project, its a 1973 tx500 frame with a 1977 XS500 engine so i wont have a problem with the head crack issue, im planing on converting it to a single VM34 carb by building a custom 2 into 1 manifold, but jetting wise in a bit lost what a good starting point should be with pilot, main, neddle, neddle jet and slide, the mikuni i have came from an old snowmobile and the jets it has dosnt have any marking on them
any tips or ideas are greatly appreciated!
Im working on a tx/xs project, its a 1973 tx500 frame with a 1977 XS500 engine so i wont have a problem with the head crack issue, im planing on converting it to a single VM34 carb by building a custom 2 into 1 manifold, but jetting wise in a bit lost what a good starting point should be with pilot, main, neddle, neddle jet and slide, the mikuni i have came from an old snowmobile and the jets it has dosnt have any marking on them
any tips or ideas are greatly appreciated!