Rider52's latest activity

  • Rider52
    Rider52 replied to the thread Vincati Build.
    Wonderful!
  • Rider52
    Rider52 reacted to GoFarKid's post in the thread Vincati Build with Like Like.
    Next, I had to build the Steering Yoke carrier, bearing mounts, and steering lock for the tripple tree. Again, the central shaft was a...
  • Rider52
    Rider52 reacted to GoFarKid's post in the thread Vincati Build with Like Like.
    A Few more images of the Top Mounts
  • Rider52
    Rider52 reacted to GoFarKid's post in the thread Vincati Build with Like Like.
    Next I had to fabricate the Top Cylinder Head mounts. They require welding a set of cross tubes to the frame, and fabricating vertical...
  • Rider52
    Rider52 reacted to GoFarKid's post in the thread Vincati Build with Like Like.
    The really scary bit was then starting to put it all together. I had to first cut the front down tubes off the Frame (The point of...
  • Rider52
    Rider52 reacted to GoFarKid's post in the thread Vincati Build with Like Like.
    OK, so next, I found an Italian supplier of a Fontana 250mm Quad LS front brake, and a really nice set of 38mm Tripple Tree Tops and...
  • Rider52
    Rider52 reacted to GoFarKid's post in the thread Vincati Build with Like Like.
    I had been searching for a couple of years, and finally found a set of 38mm Ceriani Replica (actually Nuovo Forcelli Italiana) forks. I...
  • Rider52
    Rider52 reacted to GoFarKid's post in the thread Vincati Build with Like Like.
    Next I had to source a Frame. Originally i thought of using a Ducati Darmah, but then pivoted to a 1974 750 GT. I found one on Ebay...
  • Rider52
    Rider52 reacted to GoFarKid's post in the thread Vincati Build with Like Like.
    I have always wanted a Vincent, since I was about 14 (That is 50 years ago), now its time. Ill post the journey on here. It all starts...
  • Rider52
    Rider52 reacted to ridesolo's post in the thread Restoration of a 74 RD350 with Like Like.
    I hear what you're saying... just hang in there and keep on plugging away. I'm ashamed to say that my Honda 360 project took ten years...
  • Rider52
    Rider52 reacted to ridesolo's post in the thread Tyrrell p34 mini with Like Like.
    You're gettin' pretty good at that. Seems like faster, too... maybe that's my imagination.
  • Rider52
    Rider52 reacted to bradwsm's post in the thread Tyrrell p34 mini with Like Like.
    Got the motor in and nearly done with the nose.
  • Rider52
    Back to brake calipers... after 20 years of use "serie oro" is not quite oro. The gold anodizing is dirty and scratched, and the...
  • Rider52
    Rider52 reacted to Rat_ranger's post in the thread YSR250 with Like Like.
    Caliper bracket is ready for deburr and finishing. I also finally finished turning the HF 4 drawer cart into my new weld cart. Because...
  • Rider52
    Rider52 reacted to Rat_ranger's post in the thread YSR250 with Like Like.
    I decided the caliper bracket was too big, so this is v2.
Back
Top Bottom