Search results

Can anyone point me to the right cam chain master link for a 71 cb175. I was under the impression that I am looking for a 219h, but when I saw the one on DCC, it looks different than the OEM one.

Can anyone confirm that this is the correct Time-sert kit I need for a '71 CL175? I have 12mm x 1.5 (pitch) for the thread dimensions. Is the 9.2mm insert long enough? http://www.amazon.com/TIME-SERT-Metric-Kit-Part-1215/dp/B001JK44D4...

Can anyone verify the spoke "nut" size for a 71 CL175? I'm on fleabay and a few other sites looking to pick up a spoke wrench.

On the '71 CL175s are the washer-like valve seals only on the exhaust side? I'm reassembling the head and I thought I was missing a set until I looked at Bike Bandit's parts diagram. Can anyone confirm this? Parts #17 & 16...

Just snapped a new ring :'( and wanted to see if anyone could recommend a somewhat low priced expander that would work on CB175 piston rings. Would something like this work...

Looking for a CB175 tank that is in somewhat decent condition (at least restorable)

I have a 71 CL175 K5 and I'm currently doing a top end rebuild. I took the pistons out and noticed that there were some numbers on the side. 313 & 3 and 313 & 4 (on the other one). I am about to purchase some rings and wanted to make sure what size pistons these were. I looked up parts number at...

In the process of banging out seized pistons from the cylinders I dinged up the top of the cylinder wall. I am planning on getting these honed, but want to know if these are even salvageable and if the dings will cause any damage down the road (concern for weak spot in the gasket at this point??)

Hit me up with shipping to 30024. Thanks!

anyone know if you can just swap out the spark plug wires on these coils or if the whole assembly needs to be replaced? I saw some OEM coils on Ebay for ~ $70 (?!). Is there a better place to get aftermarket coils?

After some searching, I finally located an engine for my CL175. I found it at a salvage yard and it had been sitting out for at least over a year from what I gather from the guy that runs the place. What I wanted to know was how should I go about doing a quick inspection of the engine (ie...

This is off a 72 CL175 right behind the battery box. Noob trying to label current wiring system

Hi guys, I've been lurking on the forum for a while now and I wanted to go ahead and introduce myself. Today I picked up my first ever bike, a '72 CL175 off Craigslist for a wopping $130 (originally asking $250). The bike itself, upon first glance, looks to be in pretty decent shape with little...