alzcbz
Been Around the Block
You can check one of the rollers by removing the tensioner unit from the back of the motor. The better way would be to pull the cam out and remove the head and cylinder. Tensioner sits between the cylinders.
The motor in my bike was running fine, but doing a compression test showed ring leakage on one cylinder. Pulled the motor and found oil starvation in the top end, a broken ring, tensioner rollers all chewed up, and was missing the rubber check ball for the oil passage in the lower case.
Sometime things can be deceiving.
The motor in my bike was running fine, but doing a compression test showed ring leakage on one cylinder. Pulled the motor and found oil starvation in the top end, a broken ring, tensioner rollers all chewed up, and was missing the rubber check ball for the oil passage in the lower case.
Sometime things can be deceiving.