1972/73 Honda CB 350 Build

You can check one of the rollers by removing the tensioner unit from the back of the motor. The better way would be to pull the cam out and remove the head and cylinder. Tensioner sits between the cylinders.

The motor in my bike was running fine, but doing a compression test showed ring leakage on one cylinder. Pulled the motor and found oil starvation in the top end, a broken ring, tensioner rollers all chewed up, and was missing the rubber check ball for the oil passage in the lower case.
Sometime things can be deceiving.
 
Midweek Update!

Got my wheels in!
1911981_10152327991375850_952523907_o.jpg


Had to start teaching myself how to lace them...
1076971_10152327991390850_1403628277_o.jpg


Inners first!
1009547_10152327991405850_1215356879_o.jpg


Inner - Outer
1960936_10152327991500850_988407988_o.jpg


DOOOHHHHH!!!! Inner Outer Spoke pattern wont fit clear the rotors. Had to take it apart and do inner - inner. Which was a pain in the ass... But it does look much cleaner!
1979706_10152327991525850_2039692324_n.jpg


1781053_10152327991535850_941581961_o.jpg


Rear is done and also test mounted. I'll get some pictures of how she looks right now. Need to find a set of tires after I get the wheels trued. Install the motor back in the bike and take the bike to the chopping block!
 
NICE WORK!!!! I wish I laced my own cognito hub, how did you measure the hub to order spokes? or did Devin give you the dimensions
 
Heh, I recognize that hub...I'm doing something similar with my CL (GSXR front, Cogito Moto hub):

http://www.hondatwins.net/forums/1-project-logs/25478-brooklyn-bedroom-modern-classic-350-twin.html

I'm curious to know what your plans are for the rear wheel. Is that the stock hub relaced to a new rim? What size/type did you go for? I'm hoping I can get a 140 or 130 tire on there with a 3.50 or 4.25 wheel (I'm going 17 inches).
 
Hey Tremelune, I am building a 73 CB350 also. Using a Cognito front hub laced to a 17" 2009 Honda CRF230M front wheel purchased from Hondapartsdirect. Found on fleabay a 09 CRF230M rear wheel with disk brake, using 900RR rearsets. I am just starting to fab up hydralic brake lines/ master cylinder, so no pics yet, but it is totally do-able. Rear axle same size, just have to get wheel spacers sized and cut. Hope this helps you and others.
 
DucatiDave said:
I am just starting to fab up hydralic brake lines/ master cylinder, so no pics yet, but it is totally do-able. Rear axle same size, just have to get wheel spacers sized and cut.

I don't want to hijack this thread, but I'm sure a lot of people would be very interested in the specifics of getting a disc back there (what you do for a bracket, which master & caliper you use, spacer dimensions, etc), so when you get into it, document it! Everybody likes primary sources and hard numbers.
 
Bump...

Just wondering how this turned out..? Did you ever end up throwing on that single rear shock?

Also, is that an OEM rear hub laced up with the SunRims and new spokes?

Did you need any other parts to get that Cognito hub to fit that GSXR front end? Does it just bolt on with the OEM GSXR rotors/calipers?

Sweet build so far..
 
I really like the engine scheme, I am going to do a black wrinkle, polished covers, and grind the fins; you should too. I don't see many like this. Good work.
 
Back
Top Bottom