Another cb 360t, but with a sexy twist.

plaiddenizen said:
http://www.revzilla.com/motorcycle/ballistic-performance-4-cell-evo2-battery

Ballistic battery it is lithium, but it solid state mean it isn't an lead-acid wet mixture. That way I can mount it sideways or upside down or diagonal and it wont drip acid.

I'll try to make this sound as friendly as possible - Gel cell batteries are not solid state.

You are correct, that solid state batteries are not a lead acid mixture. But solid state batteries specifically use a "solid" electrolite, most recently of which is a ceramic composite. Gel cell bateries still use a non solid electrolite, be it gel, or an absorbed glass matt. (sealed lead acid bateries don't even enter into the mix, the are still using 120 year old technology)

If you were to find a true sloid state battery today, it would be in your prototype cell phone, or jaw dropping expensive concept electric vehicle. It's possible the Government may use Solid State Batteries currently, but they aren't talking about it.
 
MGD said:
I'll try to make this sound as friendly as possible - Gel cell batteries are not solid state.

You are correct, that sloid state batteries are not a lead acid mixture. But solid state batteries specifically use a "solid" electrolite, most recently of which is a ceramic composite. Gel cell bateries still use a non solid electrolite, be it gel, or an absorbed glass matt. (sealed lead acid bateries don't even enter into the mix, the are still using 120 year old technology)

If you were to find a true sloid state battery today, it would be in your prototype cell phone, or jaw dropping expensive concept electric vehicle. It's possible the Government may use Solid State Batteries currently, but they aren't talking about it.

Well thank christ. We finally found the smartest guy in town. Everyone relax and call off the search.



;)
 
Yes agreed gel and solid state batteries are different... my mistake, however they both have the same external characteristics I was looking for... so in the bigger picture of things I don't need a bigger rear cowl for my bike
 
mrtwo said:
Bravo Sir.

Okay, yeah no one really needed to understand that. But I work for the largest battery manufacturer/developer in the world. Plus I'm currently working in the battery test facility.

I'm impressed Plaid even knew solid state batteries existed. We the public won't see them for a few years yet.
 
Re: Re: Another cb 360t, but with a sexy twist.

MGD said:
I'll try to make this sound as friendly as possible - Gel cell batteries are not solid state.

You are correct, that sloid state batteries are not a lead acid mixture. But solid state batteries specifically use a "solid" electrolite, most recently of which is a ceramic composite. Gel cell bateries still use a non solid electrolite, be it gel, or an absorbed glass matt. (sealed lead acid bateries don't even enter into the mix, the are still using 120 year old technology)

If you were to find a true sloid state battery today, it would be in your prototype cell phone, or jaw dropping expensive concept electric vehicle. It's possible the Government may use Solid State Batteries currently, but they aren't talking about it.

You spelled solid wrong
 
plaiddenizen said:
After MANY screw ups on the welding I finally got a battery tray that will function... then bondo will be my friend, however here is me sitting on the bike (glory pic) , I shortened the frame to utilize the least amount of space I needed

You'll probably find the tyre hits the loop you welded in, it's happened before (more than once on various 360 builds)
Fully compressed shock is about 9-7/8"C to C, cut a piece of bar and drill holes to check where wheel is going to end up.
Even though you look pretty light, the weight of bike and inertia can bottom out shock, particularly on undulating road (even at relatively low speeds - 30~50 mph)
Looking through rest of thread, you'll probably find footrests too far back, weld a bar few inches forward on the rear peg loop, you need them to be level with hip or only couple of inches to rear.
As they are, you'll get wrist cramp/carpal tunnel and/or an awesome six pack through holding you weight up ;D
 
I'll look into the rear hoop issue, i was thinking of longer shocks but I don't know yet... I have at least a 2" clearance under but where i live there is definitely some undulating roads ;)

The rear sets is an easy fix, and I'm glad people spoke up cause I mocked them up higher and closer and it was way more comfortable, just a reminder its a girl's first build I have a hint of what I'm doing, but majority of time I am shooting in the dark :P

However this progress i made so far is the seat
 

Attachments

  • top version.jpg
    top version.jpg
    263.6 KB · Views: 290
  • Revised.jpg
    Revised.jpg
    341.8 KB · Views: 308
I run about 3" on mine and my tire gets a semi-regular cleaning on the underside of my "fender".
 
Measure your shocks - I have a good set that should be about 1 1/2" longer that I'll send for the cost of shipping (about $16). The way you've made your seat, you should be able to bring your frame loop back enough to give some clearance beneath without having to start from scratch. That'll give you a riding position, too, that may make the bars and rearsets more comfortable.

Others will certainly weigh in as to the efficacy of raising the rear end and its affect on handling in the front - that is outside my pay grade at this point.
 
Sonreir said:
I run about 3" on mine and my tire gets a semi-regular cleaning on the underside of my "fender".

ha! there you go, just put a brush under there
 
I ran a cb350 with cb750 shocks out back. Made the front end handling a tiny bit twitchy, but not dangerously so. Take RichArd up on his offer, run the taller shocks and get yourself a steering damper.
 
plaiddenizen said:
oh boy... how much do i need? normally

If you're using the stock shocks, be prepared for them to bottom out regularly. They will fully compress from time-to-time.
 
Back
Top Bottom