Can anybody ID this half fairing?

YogiBear

Over 1,000 Posts
The one in question is on the CR750 styled 750. Its the same bike just painted in the later pics. I checked airtech with no luck.
 

Attachments

  • 7copyrightcamberoque.gif
    7copyrightcamberoque.gif
    260 KB · Views: 3,904
  • copyrightcamberoque9374.gif
    copyrightcamberoque9374.gif
    286.4 KB · Views: 1,299
  • copyrightcamberoque9635.gif
    copyrightcamberoque9635.gif
    312.1 KB · Views: 846
  • 0-cb-750-bol-d-or-classic-fc694.jpg
    0-cb-750-bol-d-or-classic-fc694.jpg
    120.5 KB · Views: 1,762
more pics
 

Attachments

  • arton14655-27f26.jpg
    arton14655-27f26.jpg
    23.8 KB · Views: 1,165
  • 8956905486_09de0e5578_b.jpg
    8956905486_09de0e5578_b.jpg
    334.2 KB · Views: 548
  • 8118351850_eaba9c778a_o.jpg
    8118351850_eaba9c778a_o.jpg
    240.7 KB · Views: 643
Re: Can anybody ID this half fairing?

http://www.airtech-streamlining.com/vintage/Rickmancr.htm
 
are you thinking RICCR1S? The cutout looks alot different between the two
 

Attachments

  • fairing.png
    fairing.png
    478.9 KB · Views: 747
http://www.discovolantemoto.co.uk/glassfibre-fairings--more-73-c.asp

I said Guzzi, but I think it's Ducati......
 

Attachments

  • john Tansley 006.JPG
    john Tansley 006.JPG
    232.1 KB · Views: 647
  • john Tansley 010.JPG
    john Tansley 010.JPG
    227.6 KB · Views: 534
YogiBear said:
are you thinking RICCR1S? The cutout looks alot different between the two

Cut outs are usually modified to fit the application, some are bigger than others depending on clip-on/handlebar location. I have a full fairing from AirTech that I had to mount with the clip-on tucked all the way in just to have clearance to get it on the bike. Then trim for control clearance.
You'll notice on the blue Honda the clutch lever barely clears the fairing, it was trimmed from the original piece in the AirTech photo.
 
o1marc said:
Cut outs are usually modified to fit the application, some are bigger than others depending on clip-on/handlebar location. I have a full fairing from AirTech that I had to mount with the clip-on tucked all the way in just to have clearance to get it on the bike. Then trim for control clearance.
You'll notice on the blue Honda the clutch lever barely clears the fairing, it was trimmed from the original piece in the AirTech photo.

You're right about cutting out the scallops to suit the application, but I don't think this one is the Air-Tech Rickman. The front of the Rickman is "flattened" compared to the round profile of this fairing. I'd say Ducati copy or maybe Dunstall copy (??)
 
The photos appear to come from a blog from France, so I'd be tempted to guess that it was modified form something available sur le continent.

I think that the Commando fairing is a Production racer fairing and seat and the tank looks like Gus Khun but I cannot remember who actually manufactured them.
 
hillsy said:
You're right about cutting out the scallops to suit the application, but I don't think this one is the Air-Tech Rickman. The front of the Rickman is "flattened" compared to the round profile of this fairing. I'd say Ducati copy or maybe Dunstall copy (??)

Airtech carries about 10 different variations of that fairing for the Rickman, different Ducati's and other applications. They have them with a flat nose, round nose, or the headlight hole cut out. Their fairings are all molded off one of the OEM fairings.
Check them out here:

http://www.airtech-streamlining.com/vintage/vintagefairingshalf.htm
 
o1marc said:
Airtech carries about 10 different variations of that fairing for the Rickman, different Ducati's and other applications. They have them with a flat nose, round nose, or the headlight hole cut out. Their fairings are all molded off one of the OEM fairings.
Check them out here:

http://www.airtech-streamlining.com/vintage/vintagefairingshalf.htm

I know they carry different styles, I was just saying it isn't the Rickman copy.
 
Back
Top Bottom