HerrDeacon said:Do you mean the overflow tube? Could be a few things: incorrect float height, stuck float, bit a dirt between float needle and seat, cracked overflow tube, drain screw not seated correctly.
hillsy said:First of all, have you had the carbs off the bike? Cleaned them thoroughly and blown out the passages with compressed air?
Flushed the tank and fuel lines of all crap? Running an inline filter?
If you haven't done this than you more than likely have a stuck open float valve from debris.
And are the carbs partially spray bombed?
Drey6 said:Cleaned thoroughly? Maybe not perfect but I followed another forums process to clean them and to make sure the passages were clear. I felt confident with the work because I followed the instructions to a "T". Also I do Have a inline filter
A guy on hondatwins had me try this and it worked( at least from what I see now, no gas coming out of the overfill tube)
I drained the carbs. Retightened the drain bolt, while opening the petcock he had me tap the carbs with the handle of the screw driver in case the float needle was stuck..... It worked. Thanks for the help everyone. I don't just learn one thing everyday on here, I learn multiple things.
Sent from my iPhone using Tapatalk - now Free
Bert Jan said:Serious? It leaked and you didn't tap it before asking here?
Oh man...
What a bummer - the world keeps on getting dumber -NOFX