CB350 Rearsets are Here!!!! Finally!!
- Thread starter Durgam_K
- Start date
schaubster
Been Around the Block
excited to put my own on.
Someone asked about a modded shift arm. Here is a stock shifter turned into a shift arm.
Sorry about the crappy pic. I will post more tomorrow when the bike is completely done.
By the way I don't think the non offset arm would not work at all on here at least in the up position, it would probably work in the down position with the linkage on the bottom of the rearset.
BR
Sorry about the crappy pic. I will post more tomorrow when the bike is completely done.
By the way I don't think the non offset arm would not work at all on here at least in the up position, it would probably work in the down position with the linkage on the bottom of the rearset.
BR
Attachments
Durgam_K
Been Around the Block
porsche77 said:
Yes, your in line for a kit. I have 3 going out Friday. (was supposed to be thursday, but rod ends didnt come in sorry ) Porsche77, How does Monday sound??
Thansk for the pic BR. That should help out others. There have been a few pics posted of meembers bike with my stuff on them ion te thread. I will try to go thru and dig up some useful ones. Even a video i think.
schaubster
Been Around the Block
anyone know of a good source for sleeves to go over the threaded linkage arms?
Durgam_K
Been Around the Block
Ive used this for just that purpose. Works great.
From Mcmaster Carr
http://www.mcmaster.com/#=e6rfvt
From Mcmaster Carr
http://www.mcmaster.com/#=e6rfvt
schaubster
Been Around the Block
Here's the part number for anyone that's curious: 8457K25
scatman200
Active Member
Any sign of a 360 kit? Definitely interested...
Durgam_K
Been Around the Block
Thanks everybody.
I do have some bad news though. AS Of December 1st, I will be raising the price on these. My Machine shop has gotten very busy, and doesnt have the time to put into my small quantities for small $$. Since i dont have the volume sales yet, I cant go to large 100 pc runs on things. I have to pay more to get parts in the same (20-30) pc numbers as before.
SO, On december 1st the new Price for these will be $167 PLUS actual shipping.
Shipping has been around $8-9, until you get west of the rockies. (Im in michigan)
After that, I use USPS Flat rate boxes for $10.95 plus $.07 for tracking.
Im very sorry for this, and I hope you can understand. I wouldnt have had the business I have had if not for DTT and its members. Thank you.
Kris @ Old School Speed
I do have some bad news though. AS Of December 1st, I will be raising the price on these. My Machine shop has gotten very busy, and doesnt have the time to put into my small quantities for small $$. Since i dont have the volume sales yet, I cant go to large 100 pc runs on things. I have to pay more to get parts in the same (20-30) pc numbers as before.
SO, On december 1st the new Price for these will be $167 PLUS actual shipping.
Shipping has been around $8-9, until you get west of the rockies. (Im in michigan)
After that, I use USPS Flat rate boxes for $10.95 plus $.07 for tracking.
Im very sorry for this, and I hope you can understand. I wouldnt have had the business I have had if not for DTT and its members. Thank you.
Kris @ Old School Speed
foundation982
Been Around the Block
Got another full set? I'd like to get a pair before the price goes up, I've been on "the list" but haven't been too involved lately