thrillseeker
Been Around the Block
I plan on getting a smaller 4 cell ballistic battery so I got a new regulator/rectifier combo unit (the kohler unit) from ebay to accommodate it. In order to install the reg/rect I had to figure out how to reconfigure my wiring to accommodate the single unit. Looking at all the wires going to each, it looked a little intimidating. It ended up being easier than I thought. Below is an updated version of the cb360 wiring diagram that shows how I have the bike wired up now. With the new single unit. I also spliced the yellow and white wires coming out of the alternator so the battery is always being charged while the bike is running instead of relying on the lights being on. The best part about all this is removing more wires and parts off the bike that are no longer needed. Please take a look at my diagram and let me know if there are any areas I don't have right. I'm definitely not an electrical engineer so everything I do comes from research online.
<img src="https://dl.dropboxusercontent.com/u/5240768/Photos/cb360-modified-wiring-diagram.jpg">
<img src="https://dl.dropboxusercontent.com/u/5240768/Photos/cb360-modified-wiring-diagram.jpg">