Sonreir said:Well... keeping the weight down was a requirement and that's why the rotors were cut and turned. After all the metal was removed, I'm up less than 40% on the weight of the rotors as compared to two stock ones.
As for keeping the oil inside, I'm using this:
![]()
I had a machinist friend turn me out a very large spacer.
Sonreir said:It's a pretty snug fit inside the spacer, so I'm counting on that to do most of the work, but we'll find out.![]()
Sonreir said:Not really, everything is spinning concentrically; the forces should be all fairly balanced.