Father Son 75 CB200T Rise From the Ruins

A motorcycle bone yard off the grid! My wallet is very happy! I dug 6 hours one day to find a cl muffler and 1 pipe. They don't pull and they don't find. You have to know what u r looking for...I grabbed a ladder and the first place I crawled up to there it was! Lucky!
 
Man I would love to find a place like that around where I live... that would be a weekend activity for me... every weekend !
 
Luugo86 said:
Man I would love to find a place like that around where I live... that would be a weekend activity for me... every weekend !
some see junk we see treasure

Lucky has rearsets from a Cbr600f3, headlight is honda Valkyrie, and now velocity stacks from a cb750... As the Cake song Short Skirt Long Jacket shes rockin with some néw components donated by family members'
 

Attachments

  • image.jpg
    image.jpg
    1.4 MB · Views: 326
Haha, looks like heaven bro... Im outta work soon, ill throw up the start of my build thread, took a couple pics too
 
My buddy Zach wanted to contribute to Lucky and did our family crest! Thanks Zach! In Latin it says "with a great struggle I emerge"
 

Attachments

  • image.jpg
    image.jpg
    452.4 KB · Views: 321
  • image.jpg
    image.jpg
    1.2 MB · Views: 340
  • image.jpg
    image.jpg
    494 KB · Views: 327
  • image.jpg
    image.jpg
    1.2 MB · Views: 316
With cb750 velocity stack. They came out of the airbox slightly deformed.
 

Attachments

  • image.jpg
    image.jpg
    1.1 MB · Views: 320
  • image.jpg
    image.jpg
    484.1 KB · Views: 309
teazer said:
KOP that makes perfect sense. What you are doing is to change the position of the jets so that they experience the greatest pressure differential a.k.a. signal. That will change fueling and sensitivity to jetting. A small change is almost immeasurable on a butt dyno in absolute terms, but it is capable of detecting changes in responsiveness and that''s where your jetting effects are paying off.

Lats time we dyno tested a CB175 based motor with three different velocity stacks, the best was a standard Honda plastic one from inside the airbox of a CB750 but the difference was basically within the range of experimental error/variance.

Our 175 race bikes all do more that 100 em pee aitch with fairings and small rider etc. Remember that a stock motor makes about 10-11 at the rear wheel and ours make over 20 on a good day and slightly less when they are tired.

Here's one we prepared earlier...

012_zps0daf4d96.jpg


As you can see the motor is more or less stock..............
P1010162_zpsa19f262d.jpg


That's a "Sloper 175" bottom end with CB200 head and custom pistons, race cam and lots of welding and machining. It's a smooth easy to ride bike but needs another 10hp to compete in that class. The exhaust is a mix of GSX400 Bandit tubes modified to fit with a custom collector and Midas special tail pipe. :-) Combustion chamber shape is very different to stock

For a speed run with a 200 motor there are all sorts of things to try as long as they stay within the rules. What are those rules in terms of engine classes and allowable modifications. I'm assuming that any modifications are allowed within a certain capacity class. Looks like you cn more or less do anything and choose a classification that fits what you built.

Teazer the more I look at these velocity stacks the more intriqued I am. The bases are all tilted at an angle, there is a hard spline in the center of the flute but 2/3 of the bell is flexible. Apparently they are meant to flex under use. I would like to see what they do using a high speed camera.
 

Attachments

  • image.jpg
    image.jpg
    965.9 KB · Views: 319
They are all soft and pliable when new. They distort in the box from the way they are clamped and harden from exposure to fuel.
 
teazer said:
They are all soft and pliable when new. They distort in the box from the way they are clamped and harden from exposure to fuel.
two different part numbers?
 

Attachments

  • image.jpg
    image.jpg
    154.9 KB · Views: 309
Looking good mate. I was going to go with a stack as well. I have a pod on there at the moment and I am not a fan. I will be swapping carbys soon anyway.

Anyway as for the two different part numbers I remember reading somewhere that two are angled and two are straight on the 750.
 
bvander said:
Looking good mate. I was going to go with a stack as well. I have a pod on there at the moment and I am not a fan. I will be swapping carbys soon anyway.

Anyway as for the two different part numbers I remember reading somewhere that two are angled and two are straight on the 750.
thanks those angled ones may come in handy on the cb200! They are only 20 bucks ea and look like they are available.
 
If those are too large for the carbs, other Hondas from that era used the same design in a smaller size for the petite carb figure.
 
teazer said:
If those are too large for the carbs, other Hondas from that era used the same design in a smaller size for the petite carb figure.
Thanks Teazer you are like our new velocity stacks, way outside of the box. I climbed up a ladder to a pile of airboxes and the first one i lay my hands on is a cb750f! Lucky I say! I think these will work. we ran up to the hardware store to get some hose clamps and plastic adhesion primer. I will cinch 'em down later.

Yea! petite compared to your basically stock carb. Lol! We can see why the cb200 is strangled at high revs with 18mm carbs compared to your 200 head. Guess we will be making an investment in 2 to one exhaust and carbs for a speed run. But first we will run the petite ones for a bench mark. Now we will have an assortment of velocity stacks and every air box in the bone yard will be like buried treasure!

I can't find this on the sloper parts fiche? Is that boretech electronic ignition?
 

Attachments

  • image.jpg
    image.jpg
    224.2 KB · Views: 302
  • image.jpg
    image.jpg
    144.4 KB · Views: 286
Let me know how the paint holds up on that velocity stack man, Im looking for a 750f air box with stacks now too for a test set and was gonna paint them up
 
Luugo86 said:
Let me know how the paint holds up on that velocity stack man, Im looking for a 750f air box with stacks now too for a test set and was gonna paint them up
2 things you wanna check:

The regular air box has a jog in the pipe to go around the center frame support.

The frame support clearance for a filter
You will need an 32mm o-ring for the velocity stack of an 18mm carb

I cut the oring off the old airbox for mock up
 

Attachments

  • image.jpg
    image.jpg
    928.7 KB · Views: 311
  • image.jpg
    image.jpg
    890 KB · Views: 324
It's a DYNA on a custom backing plate and a modified rotor and shortened crank nose. OK for a race bike with total loss ignition, not so good on the street. Riddell does a magneto conversion for the 160-175-200 motors that's worth investigating for a race bike. For teh street the easiest solution is a GL1000 Dyna mounted in place of the points.
 
Back
Top Bottom