took her out on a country road last night to break her in a bit. We are running 102.5 jets now...Uni long filters, 18mm keihins, open cl exhaust. Ran real well surprisingly no flat spots. The plugs were bronze before the ride. Thanks Bert!Bert Jan said:Awesome vids dude! I wish i get the opportunity to be a dad of your caliber. Sweet.
btw, plugs on my 200 are a bit black-ish (wet).
running .95 mains (stock), pods, and the needle is in the 4th position from below (lean). Also, it does not respond to throttle when it's more then halfway open. bogs a bit. i've done a lot of adjustments with other mains, needle heights and stuff, but this is the best we can get her, and its not good enough. She wont go above 70 km/h aswell. Timing is spot on, runs the moment the button is pushed (cold also), valves are ok, compression is around 120 (just like yours) carbs are cleaned again and again and again.
I found that one intake rubber leaked a bit so i fixed that. Before that she ran crap, would not idle well and such. Now she runs strong and good, but wont go above 70 and bogs if you try to get her to go faster. any ideas?
at first i thought it was lean, because of the symtomps (pods, no power in upper area) but plugs are covered in black and with bigger mains to 100 she runs even crappier.
His long term goal is to be a tuner for a motorcycle team...so we build another. We have been approached by a guy who has a 71 BSA rocket 3 with a big bore kit that has been sitting for 14 years in his garage. The local Norton BSA group needs a sponge. Another guy has a 75-750 gt police water buffalo in storage.kopcicle said:You are so very welcome . What's next ? ;D
~kop
thanks Tim!Tim said:Thanks right back to the two of you for sharing the adventure with all of usI'll explore ways to try and capture the thread so it can be somehow stored / backed up etc. but rest assured, as long as I'm alive, and people want DO THE TON online, it will be. I figure I've got around 40 years left in me so there you go.
Bert Jan said:Awesome vids dude! I wish i get the opportunity to be a dad of your caliber. Sweet.
btw, plugs on my 200 are a bit black-ish (wet).
running .95 mains (stock), pods, and the needle is in the 4th position from below (lean). Also, it does not respond to throttle when it's more then halfway open. bogs a bit. i've done a lot of adjustments with other mains, needle heights and stuff, but this is the best we can get her, and its not good enough. She wont go above 70 km/h aswell. Timing is spot on, runs the moment the button is pushed (cold also), valves are ok, compression is around 120 (just like yours) carbs are cleaned again and again and again.
I found that one intake rubber leaked a bit so i fixed that. Before that she ran crap, would not idle well and such. Now she runs strong and good, but wont go above 70 and bogs if you try to get her to go faster. any ideas?
at first i thought it was lean, because of the symtomps (pods, no power in upper area) but plugs are covered in black and with bigger mains to 100 she runs even crappier.
Texasstar said:We have been approached by a guy who has a 71 BSA rocket 3 with a big bore kit that has been sitting for 14 years in his garage. The local Norton BSA group needs a sponge. Another guy has a 75-750 gt police water buffalo in storage.
teazer said:Mine is at 76hp and 71 foot pounds of torque on stock carbs and weighs a touch over 400 now. Almost anything is possible.
Rich Ard said:Now this...this, I've gotta see.
lol the only lady you can call and name...and get better performanceMaritime said:It was BOTM a few months ago I believe Phat Trakka
Feb 2012 tied for BOTM
http://www.dotheton.com/forum/index.php?topic=33566.0
amen brother...thanks for the link all the photos were removed on Botm can't wait to show my sonRich Ard said:http://www.dotheton.com/forum/index.php?topic=22894.0
HOLY LORD
Rich Ard said:Now this...this, I've gotta see.