Hoosier Daddy
Earache my eye...
I can check my partially disassembled K5 450 and see if it is occupied.
That's what I thought initially.jelloelstone said:That is likely just a hole to allow oil to pass through but dont listen to me, anyone that knows these engines more should chime in!
That would be awesome!Hoosier Daddy said:I can check my partially disassembled K5 450 and see if it is occupied.
Mine is open as well, doesn't look machined for anything to fit into... and checking the service manual, on fig 3.90 it looks like it's empty as well. At least at that stage of the disassemblyDoc. said:That would be awesome!
I have the original wire that was used on the starter. Did you use the solenoid? Or just went straight to the battery? And how should I ground it? Just screw the negative of the battery into the engine casing?Hoosier Daddy said:yep, yep, and yep.
I have bench tested motors using the starter, heavy gauge wire, and a battery. If all is sound internally, it will be good readings with no carbs... and Rotella is fine.
Hope the compression tester is for bikes, the standard car units sometimes don't have the adapter we need to screw into the sparkplug holes on a motorcycle engine. But you can make one out of an old sparkplug if you have to like I did.
Good to know. I'll keep that in mind. Thank you!Maritime said:Adapters can be bought on ebay. I just ordered one for a 10mm dirt bike engine
Sent from my MB525 using Tapatalk