wickerRUG
New Member
Hello everyone,
Not too long ago, I purchased a 1972 CB450 and am in the process of doing a full rebuild/brat-cafe build. I've gotten to the point of rebuilding and refinishing the forks. However, I'm pretty sure the previous owner replaced the forks and I have no idea what model they could have come from.
The forks are 33 mm in diameter. The springs measure at about 19 1/8" in length, however I'm sure they've lost some of their recoil over the past 30+ years. I forgot to measure the spring diameter but can do so if necessary.
I thought they might be off a mid 70's CB360, but mine don't have the fender strut holes at the bottom of the fork lowers. Any help would be greatly appreciated!!!
I should mention the brakes are definitely not CB450 brakes. The pads that came off this bike are the same that I have on my '79 CB750.
Not too long ago, I purchased a 1972 CB450 and am in the process of doing a full rebuild/brat-cafe build. I've gotten to the point of rebuilding and refinishing the forks. However, I'm pretty sure the previous owner replaced the forks and I have no idea what model they could have come from.
The forks are 33 mm in diameter. The springs measure at about 19 1/8" in length, however I'm sure they've lost some of their recoil over the past 30+ years. I forgot to measure the spring diameter but can do so if necessary.
I thought they might be off a mid 70's CB360, but mine don't have the fender strut holes at the bottom of the fork lowers. Any help would be greatly appreciated!!!
I should mention the brakes are definitely not CB450 brakes. The pads that came off this bike are the same that I have on my '79 CB750.