Hi everyone. I think I’m having issues with my Pamco ei for my cb360. Possibly a fried capacitor or resistor. What’s the best way to find the culprit using multimeter?
When I put my ohm meter at 2000 through the red wire on the coil side and probe the magnet sensor, (from left to right) I get 1306, 441, and 1857 on one, and 001, 441, and 1853 on the other sensor.
If I tap into the black wire and probe the sensors I get… 546, 0, and 994 on left, and 1743, 0, and 995 on right sensor.
Green wire I get: 1092, 320, and 1655 on left sensor. And 1., 320, and 1653 on right.
White wire: 1091, 320, and 1650 on left, and 1., 319, and 1647 on right.
Sent from my iPhone using DO THE TON
When I put my ohm meter at 2000 through the red wire on the coil side and probe the magnet sensor, (from left to right) I get 1306, 441, and 1857 on one, and 001, 441, and 1853 on the other sensor.
If I tap into the black wire and probe the sensors I get… 546, 0, and 994 on left, and 1743, 0, and 995 on right sensor.
Green wire I get: 1092, 320, and 1655 on left sensor. And 1., 320, and 1653 on right.
White wire: 1091, 320, and 1650 on left, and 1., 319, and 1647 on right.
Sent from my iPhone using DO THE TON