nice work ! use lamin ating resin it allows you days to get it done and is easier tio work with by far than finsh coat resin with wax which must be done in one shot,wet
the laminating resin stays open and sticky like flypaper soon after it kicks and allows the next layer of cloth,use fabric weave along witha alterayting chopped mat do not use all mat therte is no strength in mat )
it allows the next layer to be layed down in place with clean dry hands abd then you fill it until clear ,repeat after it kicks
once you get several layers ,do not skimp, if you try to make it light it wont last a season,the final layer can then be filled with finishing coat resin
if you use the finish coat and try to layup another layer after it has kicked off well the partt will not be strong bevauise they wax in the finishh resin will not allow a proper bond
the wax is the diff between the 2 without the wax it bwould never bec ome not sticky,exclusion of air is what allo=ws full non sticky cure
you can easily verifyu wheel travel by only having one in place witrh its spring cam on soft then use a ratchet strap on that side only to lash mit up tight on the bumper
you should leave an inch to the tire from that, if you ever get good shocks they will likely have a bit more shaft travel
