Oh Lord (CB500) - The Leaky Bitch (p. 31)

Re: Oh Lord (CB500) - 02/09/12 SCHOOL ME ON DYNA IGNITIONS PLEASE!!!

3 ohm is really designed to work on a high rpm bike. At lower engine speeds it draws more current than a 5 ohm. So 5 ohm for a street bike. %'s are fine on the race track too.

DYNA S is a great ignition. Reliable and you won't believe the fat blue spark. Easy to fit and easy to time up statically. I fit them to everything - cam mount, crank mount, they are easy to adapt.

BUT a DYNA S plus Dyna coils will draw more power than stock points, so don't try to fit a small battery and marginal charging system.

To be honest, points work fine and I raced for years with points, but once you fit an electronic ignition, you never go back.
 
Re: Oh Lord (CB500) - 02/09/12 SCHOOL ME ON DYNA IGNITIONS PLEASE!!!

The only 'problem' I've found with most aftermarket electronic ignitions, they don't have a rev limiter
Stock points are designed to 'bounce' about 1,000~1,500rpm above end of red line.
e.g. my CB550f red lined at 9,300 and ended at 10,300rpm stock but would run to 11,500rpm
With several mods and electric ignition, 13,500rpm was easily achievable (82.3mph in SECOND gear)
If you have a lot more restraint than me, o or it.
Personally, I stick with points now as I know I get carried away sometimes ;D (you never grow up, you just get older ;) )
 
Re: Oh Lord (CB500) - 02/09/12 SCHOOL ME ON DYNA IGNITIONS PLEASE!!!

Ringo said:
Think you meant lingo...but I do like PBR ;)

He thinks he is Korean. So he can't say his "L"s, they come out as "R"s.
 
Re: Oh Lord (CB500) - 02/09/12 SCHOOL ME ON DYNA IGNITIONS PLEASE!!!

Thanks guys. I will order the 3 ohm stuff. I will be running a battery from a CBR 1000, because that is what will fit in my battery tray. I'll probably order the kit I saw that comes with the Dyna plug wires too.
 
Re: Oh Lord (CB500) - 02/09/12 SCHOOL ME ON DYNA IGNITIONS PLEASE!!!

I would really order the 5ohm coils. Your charging system will be a bigger concern; with a bigger battery you just might not notice it as soon.



lingo said:
He thinks he is Korean. So he can't say his "L"s, they come out as "R"s.

Hahaha! My landlord is Korean. It's the opposite for her..."R's" come out as "L's" and "W's come out as "R's"... :o
She treats me like a grandchild, and the best advice to date she's given me is to "Awrays, awrays use condom."
 
Re: Oh Lord (CB500) - 02/09/12 SCHOOL ME ON DYNA IGNITIONS PLEASE!!!

Fun fact to know about Dyna ignitions - they fire the coils when you turn the ignition switch off. Typically this is a moot point but it can be fun when you have your ear about a foot away from an open carb and you turn off said ignition. Mixture in the cylinder, intake valve is open, plug fires... POOOFFF!
Fun for the whole family!

Anyway, I've got a Dyna igniton on my 750GT. Love it. Bike starts first kick just about every time and I'm convinced the Dyna has something to do with that.
 
Re: Oh Lord (CB500) - 02/09/12 SCHOOL ME ON DYNA IGNITIONS PLEASE!!!

03rangerxlt said:
Thanks guys. I will order the 3 ohm stuff. I will be running a battery from a CBR 1000, because that is what will fit in my battery tray. I'll probably order the kit I saw that comes with the Dyna plug wires too.

You want 5 ohm for the street. 3 ohm for the race track on a bike that lives at high revs. On the street a 5 ohm will suck your battery dry and overheat the coils = slight hyperbole but in essence that's what's happening.
 
Re: Oh Lord (CB500) - 02/09/12 SCHOOL ME ON DYNA IGNITIONS PLEASE!!!

oops! I typo'ed! I ment to type 5 ohm, thank you.
 
Re: Oh Lord (CB500) small update

Frame is almost done, about to start on the motor with some paint. Just need to figure out how to clean it up without taking it apart!

551420_10151460758960107_868260106_23757817_1682218578_n.jpg


532249_10151460760390107_868260106_23757823_1641351358_n.jpg
 
Re: Oh Lord (CB500) - 04/09/2012 Ready for the next step?

So the frame is done (I think) and the motor is painted up how I want it (for the most part). I've finally reached a point where I can start putting this thing together.

My biggest fear is that I'm going to start putting this thing together and find that I have to make some modification to the frame and have to take it all back apart.

Anyways, here is the motor before:
532249_10151460760390107_868260106_23757823_1641351358_n.jpg


And and now finished up with Harley krinkle finish black paint:
523131_10151470582275107_868260106_23797858_469317802_n.jpg


522306_10151470580075107_868260106_23797839_798651139_n.jpg


The side cover that I also painted in the Harley paint is going to get tossed eventually. I have finned dress up pieces that will get the Harley paint treatment. Right now, they are painted yellow, so I will have to get them sand blasted first.
 
Re: Oh Lord (CB500) - 04/10/2012 Frame meets motor!

So, for the first time since 2010, the frame and the motor are together. I am thrilled. I know its baby steps, but I feel like I accomplished something this evening (and I did it by myself!). Damn that motor is a stubborn, heavy son of a bitch! For now, the bike is stuck up on my work bench until I can get help getting it off and onto the lift.

577918_10151496540275107_868260106_23840046_121856210_n.jpg


538600_10151496501925107_868260106_23840029_1138888600_n.jpg
 
Re: Oh Lord (CB500) - 04/10/2012 Frame meets motor!!!

Just wanted to see what it would look like, so I stuck the tank, seat, and carbs on it...

535116_10151636953740107_868260106_23877611_1740950011_n.jpg


535749_10151636933095107_868260106_23877608_1452154714_n.jpg
 
Re: Oh Lord (CB500) - 04/14/2012 Question about rear suspension bushings!!!!

Ok, I managed to use a socket and a bench vice to press the old shock bushings out of my swingarm. Now I have to figure out how to get the new bushings in! I can't use the bench vice because I broke it getting the old bushes out. Can I run a piece of threaded rod through there, and using thick washers and nuts, just tighten it together? Or am I going to have to take it to a shop and get it properly pressed? And has anybody here messed with the bushes in the swing arm pivot? I have both a set of Honda replacement parts and also new bronze bushings, but I am totally clueless...
 
Re: Oh Lord (CB500) - 04/14/2012 Question about rear suspension bushings!!!!

This is about f'n ridiculous. I can't get the tube out of the swingarm. I am talking the liner of the swingarm, not the thing with the grease fittings. WTF?!?!?
 
Re: Oh Lord (CB500) - 04/14/2012 Question about rear suspension bushings!!!!

You didn't powder coat it?
It's just rusted into bushings, BFH and drift will 'cure' it
 
Re: Oh Lord (CB500) - 04/14/2012 Question about rear suspension bushings!!!!

No powder coat, just painted the the swingarm, but masked off these parts. I hit it with a hammer so hard that it chipped the concrete, deformed the metal a little, and lightly dented the swingarm. Also, there is a light score in the tube. If its greased well before I reassemble it and slide that hinge part in with the grease fittings, will it matter? (I may have put that score in there.)
 
Re: Oh Lord (CB500) - 04/14/2012 Question about rear suspension bushings!!!!

Post a picture of the offending part, want to make sure we are talking about the same thing
 
Re: Oh Lord (CB500) - 04/14/2012 Question about rear suspension bushings!!!!

Are you talking about the collar (#13) that goes over the swing arm bolt against the bushings (#10), or the bushings?

I thought you already got the bushings out, so the collar should have been out before that...

1960_CHAIN%20CASE%20@%20SWINGARM.gif
 
Back
Top Bottom