03rangerxlt
Been Around the Block
Re: Oh Lord (CB500) - 05/22/2012 Banjo bolt question (pg. 22)
sounds good. i have a bunch of fresh crush washers ready to go.
in other problems; i was tightening down the bolt thats the drain plug for one of the forks, and it kept spinning with very little force. it spun the head all the way off, with the rest of the bolt stuck in the fork but about 1/32 of an inch. I ordered a really small tool for backing out bolts/screws that are stripped/broken. i'm crossing my fingers that this thing will work to get the bolt out or i am SCREWED. (really, no pun intended.)
sounds good. i have a bunch of fresh crush washers ready to go.
in other problems; i was tightening down the bolt thats the drain plug for one of the forks, and it kept spinning with very little force. it spun the head all the way off, with the rest of the bolt stuck in the fork but about 1/32 of an inch. I ordered a really small tool for backing out bolts/screws that are stripped/broken. i'm crossing my fingers that this thing will work to get the bolt out or i am SCREWED. (really, no pun intended.)