"Patina" The 1973 CB175 Cafe Racer

Re: "Patina" The 1973 CB175 Cafe Racer


Texasstar said:
What about on the bare wire with no cap?


Sent from my iPhone using Tapatalk

Yeah I get continuity from bare wire to bare wire.

Where do I buy one of those gap makers to try to get a spark without the cap?
 
Re: "Patina" The 1973 CB175 Cafe Racer

1sttimer said:
Yeah I get continuity from bare wire to bare wire.

Where do I buy one of those gap makers to try to get a spark without the cap?
Auto parts store, they have an inline one also. You can set the air gap. How are you testing for spark now????
 
Re: "Patina" The 1973 CB175 Cafe Racer


cafe mike said:
Auto parts store, they have an inline one also. You can set the air gap. How are you testing for spark now????

Well I had it connected to the cap. But don't have continuity so that does crap.
 
Re: "Patina" The 1973 CB175 Cafe Racer


cafe mike said:
Auto parts store, they have an inline one also. You can set the air gap. How are you testing for spark now????

When you say air gap you just mean space between the plug and the spot I'm grounding it on?
 
jeezus dude you dont need to buy a sparker just hold the wire an 1/8 from ground ;D
it wont shock you and the spark will easily jump a large gap at atmospheric presure
 
xb33bsa said:
jeezus dude you dont need to buy a sparker just hold the wire an 1/8 from ground ;D
it wont shock you and the spark will easily jump a large gap at atmospheric presure
first timer BSA is known for licking his fingers and grabbing the end of the wire this is a well-known fact that hipsters will not do this


Sent from my iPhone using Tapatalk
 
Re: "Patina" The 1973 CB175 Cafe Racer

1sttimer said:
Well I had it connected to the cap. But don't have continuity so that does crap.
Let's just say your meter sucks. Real world test it. Air gap is how much distance for the spark to jump. Air gap is outside of the combustion chamber.
 
Re: "Patina" The 1973 CB175 Cafe Racer

We had so much spark from that Dyna coil it was joy jumping off of the points


Sent from my iPhone using Tapatalk
 
Re: "Patina" The 1973 CB175 Cafe Racer

Ok, turned the ignition on, held the bare wire about .050 from the cylinder stud bolt, turned the crank, no spark.
 
Re: "Patina" The 1973 CB175 Cafe Racer


xb33bsa said:
and you have 12 volts to the coil ?

And I would measure this on the voltage setting measuring across the connections on the left and right side of the coil?
Don't crucify me for this stupid question.
 
Re: "Patina" The 1973 CB175 Cafe Racer

1sttimer said:
And I would measure this on the voltage setting measuring across the connections on the left and right side of the coil?
Don't crucify me for this stupid question.
Yes voltage setting. But hold the negative to you battery and positive on coil with switch on
 
Re: "Patina" The 1973 CB175 Cafe Racer

Yellow wire is coming from the EI, white is from the harness .

rymyvety.jpg
 
Re: "Patina" The 1973 CB175 Cafe Racer

1sttimer said:
Yellow wire is coming from the EI, white is from the harness .

rymyvety.jpg
Switch them. White is positive comming from harness. And coil positive is on left
 
Re: "Patina" The 1973 CB175 Cafe Racer

If I hold the negative test lead against the positive battery terminal, and touch the positive lead against the coil post I get -12V
 
run a temp jumper +12v directly from bat + to white wire terminal on coil after removing white wire.... test again for spark
 
Back
Top Bottom