"Patina" The 1973 CB175 Cafe Racer

Uh oh...I found a local guy a few miles away that has a garage full of old enduros and and other bikes. He does commissioned builds for a living (not interested here)...this could be baaaaaaad for the wallet.
 
1sttimer said:
Uh oh...I found a local guy a few miles away that has a garage full of old enduros and and other bikes. He does commissioned builds for a living (not interested here)...this could be baaaaaaad for the wallet.
that is cool ill bet he knows the valuable ones as well
be careful trying to run with no cap at all, gas sloshes,paint gits ruint, fire
 
Re: "Patina" The 1973 CB175 Cafe Racer


xb33bsa said:
that is cool ill bet he knows the valuable ones as well
be careful trying to run with no cap at all, gas sloshes,paint gits ruint, fire

He's got a CT1 that I have my eye on...

jajy8ydu.jpg



Sent from my iPhone using Tapatalk
 
Re: "Patina" The 1973 CB175 Cafe Racer

That was pre-gasket replacement. You can see my oil soaked brick from the oil running down the kickstand :)


Sent from my iPhone using Tapatalk
 
I took her to fill up at the pump for the first time today. Went about 5 miles total. Overall I'm very happy with the handling...she "flicks" very well and feels centered. I wonder what Texasstar is running for top speeds lately...I can get about 62 going uphill...about 67 going down. could get 70 if I had long enough stretch but I'm pushing 9k rpms.

Happy!
 
1sttimer said:
I took her to fill up at the pump for the first time today. Went about 5 miles total. Overall I'm very happy with the handling...she "flicks" very well and feels centered. I wonder what Texasstar is running for top speeds lately...I can get about 62 going uphill...about 67 going down. could get 70 if I had long enough stretch but I'm pushing 9k rpms.

Happy!
Now get it dyno tuned!!!
 
Re: "Patina" The 1973 CB175 Cafe Racer


cafe mike said:
Now get it dyno tuned!!!

Dude funny story about that. About 12 years ago my dad bought me a Yamaha Blaster 4-wheeler from this place called Max Speed where I grew up. Well, I was googling the closest Dyno location and guess where it was? Max Speed.

They have since changed ownership but it made me happy that place survived. Now they specialize in dyno tuning and the owner even has a 175. So needless to say I'm happy. I would like to get my new shocks on there first before I spend the money getting it dyno'd.

Speaking of, I found a pretty good set of 'Assault' shocks for 100 bucks that are 13" eye to clevis. Is there any affiliation with Red wing because they are NOS too, and they look almost the same.
 
Re: "Patina" The 1973 CB175 Cafe Racer

Well, I was looking under the engine this afternoon to see where this little drop of oil/gas mixture was coming from. It was coming from the carb overflow and cylinder head breather mixing together as they exited under the engine.

Anyway, I took a peek and the little sucker pissed right in my eye!! The carb bowl burped I guess and about half an ounce projected right into my eye.

That wasn't the first experience I've had with gas so I spent some time under the shower head with my eye open. I'm tryin to figure out what's wrong with her that would make her do that to me ;)


Sent from my iPhone using Tapatalk
 
Re: "Patina" The 1973 CB175 Cafe Racer

Hey guys, what's #2 in this picture?? I just realized I've been riding this thing with a wobbly rear sprocket. I removed the sprocket guard because I didn't like it, but I didn't think that would make a difference. In this drawing it seems that there is some sort of spacer between the hub and the sprocket. I don't have that but it would solve my problem I think....

9ehyhaga.jpg



Sent from my iPhone using Tapatalk
 
Re: "Patina" The 1973 CB175 Cafe Racer

1sttimer said:
Hey guys, what's #2 in this picture?? I just realized I've been riding this thing with a wobbly rear sprocket. I removed the sprocket guard because I didn't like it, but I didn't think that would make a difference. In this drawing it seems that there is some sort of spacer between the hub and the sprocket. I don't have that but it would solve my problem I think....

9ehyhaga.jpg



Sent from my iPhone using Tapatalk
you cant see them they presses into the hub, it is a rubber and steel cushion dealy
the spuds that bolt onto the sprocket (11)engage them
takse a little shock out of the drive train
some very slight movement is normal but it shouldnt be a floppy assembly
 
Re: "Patina" The 1973 CB175 Cafe Racer


xb33bsa said:
you cant see them they presses into the hub, it is a rubber and steel cushion dealy
the spuds that bolt onto the sprocket (11)engage them
takse a little shock out of the drive train
some very slight movement is normal but it shouldnt be a floppy assembly

I bet I'm getting about .2 inches movement laterally. That too much? I'll post a video here shortly.
 
Alrighty, measured it and she is moving 3.7mm at the tip (measured from hub surface with calipers).

http://youtu.be/q5_fPZRug1A
 
i think you should take that down and look at it closer pull the wheel of then the big clip and check it out
before you do though do you have excessive sprocket runout,radially? is the chain going tight loose tight loose as you spin the wheel ?
 
Back
Top Bottom