we don't run the gasket on the tank cap for additional venting1sttimer said:I am smoking a little bit, but I believe that's due to my rings not being seated yet. I think Texasstar had the same issue for a little while.
It was popping a little bit wanting to hesitate a little. Not sure what a miss feels like or sounds like but it was sputtering some.
Also, the vent comment is interesting. I have an ebay replica gas gap but I don't see how it could vent. The reason I say this is that I was able to turn the tank upside down and change out the petcock with gas in the tank without too much leaking beyond the cap.
yes cush drive get the spacer warsher if it is constantly rattling around it will wear out the nose on the hub more quicker1sttimer said:There really isn't any difference in the chain slack as I rotate the wheel (that radial runout?). Are you saying there's an out-of-roundness effect going on with the sprocket?
I feel like if I had a .040" spacer between the sprocket and the circlip, it would knock it out.
Cush drive?
xb33bsa said:yes cush drive get the spacer warsher if it is constantly rattling around it will wear out the nose on the hub more quicker
this could cause the sprocket to be eratic radially
Take a look at my build, I have photos. I cut the chain gaurd down so I didn't have that problem1sttimer said:I just purchased that little ring from western hills honda. They called it a "dust plate" but he said it was about 1/16" thick...hopefully that works out. I'll update when it comes in. I may have a hard time letting that keep me off the bike....
cafe mike said:Take a look at my build, I have photos. I cut the chain gaurd down so I didn't have that problem
cafe mike said:In other good news realtions. My bike is getting loading inside of my trailer in the am. ,and getting hauled to my job tomorrow ( on my day off). I will me able to make the farkle parts for both our bikes!!!! We have a hot rod cruise in every month. On May 29 my bike ( horse with no name) will be unvaliled to the general public. I'm looking forward to the commentary. And hope fully future endeavors![]()
1sttimer said:Cool cool - I need the guard bad! I gotta clean the frame and engine every time I roll back in. Haha
On the cruise you gonna be able to keep up. What's your wife gonna ride? Drz?
cafe mike said:Psssssst...... Real men grab the roll of Saran Wrap and toss on a couple of revolutions
1sttimer said:Nah, the baking of the paint at first startup smelled bad enough
1sttimer said:Can you guys give me some insight into oil coming out of the cylinder head breather? How much is acceptable, how much is too much? I'm seeing a 3-4 drops every time I ride the bike.