"Patina" The 1973 CB175 Cafe Racer

This thing worth $100? 1969 TC100

6ebe8aza.jpg


4uvuhegu.jpg


atupy9y3.jpg
 
Re: "Patina" The 1973 CB175 Cafe Racer

I kinda wanna strip all lights and everything and make a dirt bike out of it.
 
Re: "Patina" The 1973 CB175 Cafe Racer


xb33bsa said:
it is a 72 or latr

100? dollers? nah not unless you need parts real bad and it has some good parts, looks ruf though

He's got all the parts. He said it's a 69 but I didn't think that existed. Here's the wiring....

................
..........
......uhhhh that custom? Hahaha

sa5ebymu.jpg
 
Re: "Patina" The 1973 CB175 Cafe Racer


xb33bsa said:
don't waste your time with that pos
get a latr model dirtbike

Aight. I want something cheap to teach the woman on that doesn't bother me if it's dropped. Guess a plastic tank bike.
 
Re: "Patina" The 1973 CB175 Cafe Racer

1sttimer said:
Aight. I want something cheap to teach the woman on that doesn't bother me if it's dropped. Guess a plastic tank bike.
find an xr100 or the yamaha equilvilent
 
Re: "Patina" The 1973 CB175 Cafe Racer


xb33bsa said:
if its good enuf for kenny roberts..............
dt1.jpg

Heyo! Sounds like a winner. I should have grabbed that CT1 I saw the other day. I want a little smoker so bad.
 
Re: "Patina" The 1973 CB175 Cafe Racer

In other news I set the cam chain tension on the 175 with the woman's help per your instructions. Then set the static timing. I set it a little advance of the full advance mark to see what that does to dynamic at 3500
 
Re: "Patina" The 1973 CB175 Cafe Racer

Did some stator tests recently. Output at three RPM levels for each of the three wire readings across the stator plug are as follows:

2500 RPM

19 V
31 V
10 V

3000 RPM

22 V
38 V
13 V

3500 RPM

27 V
42 V
14 V
 
Re: "Patina" The 1973 CB175 Cafe Racer

Sonreir is helping me troubleshoot my charging issue. The stator statically tested OK for resistance, not great but usable.

Then tested AC output of the stator when running.

Sonreir is thinking I may have a bad RR which may have too high of an internal resistance, not allowing enough voltage.
 
Re: "Patina" The 1973 CB175 Cafe Racer

1sttimer said:
Sonreir is helping me troubleshoot my charging issue. The stator statically tested OK for resistance, not great but usable.

Then tested AC output of the stator when running.

Sonreir is thinking I may have a bad RR which may have too high of an internal resistance, not allowing enough voltage.
Really. Damn I wonder if that's my problem also. Can you shout out how you tested fields?
 
Re: "Patina" The 1973 CB175 Cafe Racer

Sonreir, tell me if I'm communicating this incorrectly...

Test 1) test resistance between each of the wire combinations on the stator wires. You should get no greater than three, but less than .5

Test 2) test each of those stator wires to ground. You should get zero

Test 3) start the bike and test ac voltage between each of those 3 brown wires. Voltage should increase with revs. I got readings listed above at the listed RPM levels.


Tell me what you get at different RPMs. Matt said mine are a little low but not terrible. He was getting 60V at higher RPMs on his cb360.
 
Back
Top Bottom