xb33bsa said:just scored these off ebay they may be going on my Z1![]()


ha i never learnt to ride neether :'(1sttimer said:I don't believe you own any bikes. Just parts.![]()
xb33bsa said:just scored these (Marzocchis)
xb33bsa said:just scored these off ebay they may be going on my Z1![]()
xb33bsa said:mine that i just got in,look ok too![]()
Tune-A-Fish said:New stuff, something don't belong, but I do need a way to pay for this shit. ring clamps for the Honda, figure I have a few to work on and the kids is due for an over bore so WTH... brake and oil plumbing, wires, sparky stuff I had for a while now... and the SWEET BSA tank... Had to make a run back to NE and get the hardtail kids way to busy workin to get after it so I'm gonna finish and send tins off to paint.
i dont think you want them, 1975 z1903 the stock shocks are pretty lameTune-A-Fish said:Cool! Nice Zoochis mang!! and i will buy your stock KYB's okay![]()
spotty said:be careful with those Galfer brake lines, i've had them before and, to put it mildly, they were crap, the ends fell off two of them......i'll not be using their stuff again
xb33bsa said:i dont think you want them, 1975 z1903 the stock shocks are pretty lame
xb33bsa said:sorry ,man , the shocks i have to get top doller :-[
Tune-A-Fish said:Okay... well anyways those big pig back Zooch's won't look right on the Z1 so just go through em, clean em up put a nice gunmetal paint on them and sell em to me for a good DTT price??? and when are I getting a price for the CB shocks 14" eye to eye, I can fudge a little short and put a chunk of ally stock under the swinger mounts if you have a good price on some, I held the swinger back from powder for this reason and I might sand it to natural anyway. Barter is good too if you need/want any parts.
Tune-A-Fish said:That's encouraging... NOT! So what the fuck, Galfer lines are shit then? I don't need the lines popping the crimps that's for sure... Anyone else with poor perf from Galfer lines??? :-\
yer sister has a Z1 ? what are you saying itsa girls bike ?crazypj said:The look OK, I fitted a pair to my sisters Z1 when I did head bearings. I was really amazed at the improvement in handling (it already had the frame bracing kit installed)