Post a pic of your latest purchase

20160321_162950_zpsuoybnufc.jpg
 
Dyna coils, more connectors, a chunk of metal and a boring bar...

7182aab98310e2bd1ba42352562a5ecd.jpg


35035119591ee39095d4751d383c26a9.jpg



Sent from my iPhone using Tapatalk
 
drewfinn said:
Shinko 244 3x17s,a 66 ct200 front fender, new-to-me valve head (no leaks! :)) and a headlight protector...all for my 64 Honda c200...looks like a busy evening!

What's that headlight protector off of? Looks like an old Elsinore grille?
 
My hands are not small at all. That center drill is massive. Come in with an order the old man made, no clue what that thing is going to be used for. The tips on it are 5/16".
 
Looks like a countersink to me, I have a small set from skinning panels and making demo kits using screws, having both ends cut the same is only to double the life of the tool
 
its a centre bit. When you have a longer work piece, you need to hold both ends on the lathe so one side is the chuck and the other end is held in place with a something like a live centre. This bit drills the hole for the live centre to sit in
 
Picked up a chop saw off CL today...
FullSizeRender_zpstcc56hus.jpg

Makita 2414NB
Was asking $60, but dropped it to $40 because the clamp is MIA.
I did a lil checking and found the clamp is discontinued. Guess I'll just have to fab one up.

Picked these up off CL last Friday...
FullSizeRender_zpstpnqjyyr.jpg

Freebie. They're gonna get cleaned/painted/and some mild custom work, then dropped in the Stepside.
 
Kamn said:
its a centre bit. When you have a longer work piece, you need to hold both ends on the lathe so one side is the chuck and the other end is held in place with a something like a live centre. This bit drills the hole for the live centre to sit in
This. And it chucks up in a 3/4 collet to center drill aluminum bits that don't need a pilot hole. Makes starting out with a big bit easier.
 
J-Rod10 said:
This. And it chucks up in a 3/4 collet to center drill aluminum bits that don't need a pilot hole. Makes starting out with a big bit easier.

did I win some kind of prize?? Like, a 10" round stock 6061.....I only need 10 inches of it
 
these fox factory superbike shocks just in............ :-* :D
 

Attachments

  • 015.JPG
    015.JPG
    1.1 MB · Views: 301
  • 012.JPG
    012.JPG
    1.1 MB · Views: 308
  • 014.JPG
    014.JPG
    918.6 KB · Views: 312
Tune-A-Fish said:
Shweet foxys... make em pretty :o
at 14" eye to clevis they will be just right on someones superbike replica h0nda F
its the only pair of old fox shocks,actually they are fox factory as far as i can tell, the offshoot of fox original company that really got into some great shocks like what kawasaki used on 1075cc superbikes
it is the only pair i have seen with the nicely tig welded end cap.... the tell on them being fox factory is the body diameter,style of spring retainers, and the seal head construction with just 2 simple machined wrench flats
i am curious to get a look at and document the valving lashup
 
Back
Top Bottom