Maritime
Over 10,000 Posts
Me too, hope I can work out the translated instructionsTune-A-Fish said:Look forward to the install write up and test results ;D
Me too, hope I can work out the translated instructionsTune-A-Fish said:Look forward to the install write up and test results ;D
drewfinn said:Shinko 244 3x17s,a 66 ct200 front fender, new-to-me valve head (no leaks!) and a headlight protector...all for my 64 Honda c200...looks like a busy evening!
J-Rod10 said:
This. And it chucks up in a 3/4 collet to center drill aluminum bits that don't need a pilot hole. Makes starting out with a big bit easier.Kamn said:its a centre bit. When you have a longer work piece, you need to hold both ends on the lathe so one side is the chuck and the other end is held in place with a something like a live centre. This bit drills the hole for the live centre to sit in
J-Rod10 said:This. And it chucks up in a 3/4 collet to center drill aluminum bits that don't need a pilot hole. Makes starting out with a big bit easier.
J-Rod10 said:About the biggest I mess with is 7".
at 14" eye to clevis they will be just right on someones superbike replica h0nda FTune-A-Fish said:Shweet foxys... make em pretty![]()
That's what I'm here for J-RodJ-Rod10 said:Well played, Calferacer.
Sent from my SAMSUNG-SM-N920A using Tapatalk