JacksDeathtrap
New Member
I have a 95 Seca II, only had it for a few weeks now. Ive learned they are quite coldblooded but recently its been slow to start because of a spark issue. When I leave it overnight or sometimes just for a couple hours, it will crank over but refuse to fire. I've pulled a plug and there is no spark. I'll crank it for a few seconds, look for something disconnected, check the obvious things and hope for the best and crank it again. It starts within 5 or 10 minutes and runs fine. (Usually I have to crank it at least 4 or 5 times)
I don't know if it's a kill switch or possibly an ignition issue. Maybe the coils are going bad, I'm going to check the voltage on them hopefully today.
Any thoughts or suggestions would be appreciated.
I don't know if it's a kill switch or possibly an ignition issue. Maybe the coils are going bad, I'm going to check the voltage on them hopefully today.
Any thoughts or suggestions would be appreciated.