Seca II slow/hard start- Spark Issue

JacksDeathtrap

New Member
I have a 95 Seca II, only had it for a few weeks now. Ive learned they are quite coldblooded but recently its been slow to start because of a spark issue. When I leave it overnight or sometimes just for a couple hours, it will crank over but refuse to fire. I've pulled a plug and there is no spark. I'll crank it for a few seconds, look for something disconnected, check the obvious things and hope for the best and crank it again. It starts within 5 or 10 minutes and runs fine. (Usually I have to crank it at least 4 or 5 times)

I don't know if it's a kill switch or possibly an ignition issue. Maybe the coils are going bad, I'm going to check the voltage on them hopefully today.

Any thoughts or suggestions would be appreciated.
 
Back
Top Bottom